Keith Shelnutt
Active Member
- Thread starter
- #1
Dash lights flashing all kinds of faults then quit, had to erase/clear engine fault DISC what does this mean and what is the fix?
Sponsored
Thank you. I replaced this today, after yesterday being dead in 1 lane traffic jam (I made it worse) when JT went into auto park after every light lit up. I've been chasing the gremlin that lights up my dash, hoping this can bus is the cure for $94 and 10min fix.This video at the 7 minute mark shows one of these CAN BUS Star connectors taken apart and shows the cracked solder joints. I would imagine these probably could get reflowed with a soldering iron to save on a replacement connector if one has the skill set for it.
Update, 6 weeks since replacement, and NO problems. Must've been my fix. Thank youThank you. I replaced this today, after yesterday being dead in 1 lane traffic jam (I made it worse) when JT went into auto park after every light lit up. I've been chasing the gremlin that lights up my dash, hoping this can bus is the cure for $94 and 10min fix.