Door hinges

[MyMojaveJT]

Question, what other models of jeeps have a similar enough hinge that I could go to a junkyard and get them and use them to create wall hangers for when the doors are off?? JK JL?

Sponsored

 

[TomH]

This might not be answer you are looking for, but I used 2 pieces of 2"x2" angle 4' long. They run parallel with one 1' above the other. Drill the holes in the right spots and you can hang the doors on them. It works well. You will also be able to catch 4 wall studs so it will support the weight.

 

[MyMojaveJT]

This might not be answer you are looking for, but I used 2 pieces of 2"x2" angle 4' long. They run parallel with one 1' above the other. Drill the holes in the right spots and you can hang the doors on them. It works well. You will also be able to catch 4 wall studs so it will support the weight.

Thanks Tom, I might go that route depending on the hinge options, I hadnt thought about using angle iron.

 

[stingrey]

I have seen lots of ways to make a door hanger. This new video appears to be the least expensive and simple method I have seen so far.

 

[vf171]

Question, what other models of jeeps have a similar enough hinge that I could go to a junkyard and get them and use them to create wall hangers for when the doors are off?? JK JL?

I've been thinking of the same thing. I totaled my JL a couple months ago and it got me to thinking about this. Still don't know for sure though what other models would work.

 

[Sazabi19]

I thought it was only JL or JT. Other's had different hardware/sizes. Could be wrong.

 

[mog]

I got some of the Xprite Wall Mounts from a fellow member here. They are outstanding

 

[King Crimson]

I got some of the Xprite Wall Mounts from a fellow member here. They are outstanding

Who has that kind of free wall space in their garage?

 

[BLK HOLE]

Simple eye bolts from Home Depot work. Its what I use.

Sponsored