Sold: Iowa ebay steel front bumper for sale - $75 OBO PICKUP ONLY

[ShadowsPapa]

"Chinese knock-off" ebay bumper - front, JT and JL.

Totally taken apart, blasted and powder coated professionally in summer of 2022.
I've replaced and in some cases, replated some of the fasteners in black zinc.
When I installed it on the 2022, I bought the fog light bezels that do not have the sensor holes in them like these come with from eBay or Amazon.

(top bar not included but it's not pictured below, either)

Sorry, local pickup only. This is heavy - likely 70 pounds or so, and would be closer to 80 packaged up, I'd have to do some reassembling or box it in 2 boxes.
Just out of the realm of possibilities at this time.
It had to be disassembled for removal, it would take a lot to pack and get it shipped.

It was on my 2022 JT Overland until yesterday.
My new truck will have a steel bumper, so this will be taking up space. Time to thin out some extra parts and I can't carry it up and down stairs any more where I store most spare Jeep parts.

LOCAL PICKUP ONLY
Will come with the LED fog lights it originally came with - which really aren't bad, extra fasteners.
it was disassembled after removal from my JT to get the black tow hooks back out of it, it will come with the red ones the bumper shipped with.

Jerry (forum member jebiruph ) took it off and apart so if you want a second opinion on the bumper, condition and so on, feel free to check with him.

I know that it cost $250 to powder coat a Jeep bumper, can't recall what I paid for it originally, but it will have a finish similar to factory steel bumpers.

Can supply more pictures if needed.

75 OBO - local pickup only.

Sponsored

 

[agoldxj]

Good deal for someone local, pretty sure they’re $3-400 on eBay now with the crappy powder coat.

 

[MudderNuker]

"Chinese knock-off" ebay bumper - front, JT and JL.

Totally taken apart, blasted and powder coated professionally in summer of 2022.
I've replaced and in some cases, replated some of the fasteners in black zinc.
When I installed it on the 2022, I bought the fog light bezels that do not have the sensor holes in them like these come with from eBay or Amazon.

(top bar not included but it's not pictured below, either)

It was on my 2022 JT Overland until yesterday.
My new truck will have a steel bumper, so this will be taking up space. Time to thin out some extra parts and I can't carry it up and down stairs any more where I store most spare Jeep parts.

LOCAL PICKUP ONLY
Will come with the LED fog lights it originally came with - which really aren't bad, extra fasteners.
it was disassembled after removal from my JT to get the black tow hooks back out of it, it will come with the red ones the bumper shipped with.

Jerry (forum member jebiruph ) took it off and apart so if you want a second opinion on the bumper, condition and so on, feel free to check with him.

I know that it cost $250 to powder coat a Jeep bumper, can't recall what I paid for it originally, but it will have a finish similar to factory steel bumpers.

Hey Shadows, which plugs did you use to cover the sensor holes? The plugs that came with mine were useless and didn't stay on. I ordered 1" rubber grommet plugs but their were too small.

 

[ShadowsPapa]

Hey Shadows, which plugs did you use to cover the sensor holes? The plugs that came with mine were useless and didn't stay on. I ordered 1" rubber grommet plugs but their were too small.

Assuming they haven't changed any - it was these. Bought years ago when I first bought the bumper. When i bought mine, it didn't come with plugs.

I bought the bezels without holes for it, as shown in the bumper pictures.

https://www.amazon.com/dp/B07SY8SR62

Good deal for someone local, pretty sure they’re $3-400 on eBay now with the crappy powder coat.

I could use the cash, of course - paying for help to get my truck stripped, and the costs of getting the new one setup with all of my stuff, but sometimes it's also a matter of space and having too much around.
There's a lot of people out there who want steel bumpers, however- not so many in Iowa who would drive to get it, so I have to be realistic there as well.
I'm aiming at a pretty small subset of Jeep people.

 

[agoldxj]

Assuming they haven't changed any - it was these. Bought years ago when I first bought the bumper. When i bought mine, it didn't come with plugs.

I bought the bezels without holes for it, as shown in the bumper pictures.

https://www.amazon.com/dp/B07SY8SR62

I could use the cash, of course - paying for help to get my truck stripped, and the costs of getting the new one setup with all of my stuff, but sometimes it's also a matter of space and having too much around.
There's a lot of people out there who want steel bumpers, however- not so many in Iowa who would drive to get it, so I have to be realistic there as well.
I'm aiming at a pretty small subset of Jeep people.

I get that, I’ve been contemplating selling all of the factory stuff I have laying around off of our 2 jeeps. It’s out of the way in the barn, so not as in the way as yours. The extra cash would be nice, but if we ever trade in they would be nice to have to swap back on.

 

[MudderNuker]

Assuming they haven't changed any - it was these. Bought years ago when I first bought the bumper. When i bought mine, it didn't come with plugs.

I bought the bezels without holes for it, as shown in the bumper pictures.

https://www.amazon.com/dp/B07SY8SR62

I could use the cash, of course - paying for help to get my truck stripped, and the costs of getting the new one setup with all of my stuff, but sometimes it's also a matter of space and having too much around.
There's a lot of people out there who want steel bumpers, however- not so many in Iowa who would drive to get it, so I have to be realistic there as well.
I'm aiming at a pretty small subset of Jeep people.

Thanks. Will look for them on Amazon.

 

[ShadowsPapa]

I should have stated in the first post - I'm not far from Des Moines - about 20 minutes from the east mixmaster where I80 and I35 unmix and go their separate ways, then I'm not far off I80 which runs along the north side of Altoona, Iowa about 15 minutes away from me.

 

[ShadowsPapa]

Edited for price - $75 OBO - but local pickup only.
It had to be taken apart to remove it, and to try to package all of the parts or put it back together and box it all up - talking probably 70 pounds. Steel front bumpers are heavy.

 

[Stitchedupseats]

I’ll be coming through Des Moines and heading west towards Spencer mid June. I’ll keep an eye out if you still have it.

 

[Jclayc]

Still available?

 

[ShadowsPapa]

Still available?

Yes, I still have it, still apart from having removed it from my 2022 when I traded it.
(no shipping, though)

 

[Jclayc]

I’ll take it, I actually have one of my drivers coming back to Nashville from Oregon that can grab it this weekend. Can you send me a pm and we’ll get everything sorted? Thanks!

 

[new to gladiator]

I’ll take it, I actually have one of my drivers coming back to Nashville from Oregon that can grab it this weekend.

What a coincidence! My son that lives in Portland bought a steel bumper out there for me and I need to figure a way to get it to Michigan somehow haha.

 

[Jclayc]

What a coincidence! My son that lives in Portland bought a steel bumper out there for me and I need to figure a way to get it to Michigan somehow haha.

She’s probably 5 hours from Portland, closer to Redding than PDX.

 

[JBerd81]

OP, did this sell?

Sponsored