Sponsored

Fusion OBD App

TomPeak

Member
First Name
Tom
Joined
Feb 1, 2022
Threads
4
Messages
17
Reaction score
11
Location
Michigan
Vehicle(s)
2022 JTRD
Occupation
Land Surveyor
If anyone is using the Fusion OBD app, please school me on something. On the bottom of my display…
Percent Of Soot Mass - at what % does regen occur?
DPF Regen Type - What value does it show for passive and what for active regens?
DPF Regen Status - what values will it show and does it give values for passive and also for active?
Jeep Gladiator Fusion OBD App 22D81DE3-73E3-4929-93B9-18BA2EF06D02
Sponsored

 

BEERviper

Well-Known Member
First Name
Jon
Joined
Nov 9, 2020
Threads
3
Messages
197
Reaction score
168
Location
Longmont, CO
Vehicle(s)
2021 Jeep Gladiator SS eco Diesel
Occupation
Real Estate
If anyone is using the Fusion OBD app, please school me on something. On the bottom of my display…
Percent Of Soot Mass - at what % does regen occur?
DPF Regen Type - What value does it show for passive and what for active regens?
DPF Regen Status - what values will it show and does it give values for passive and also for active?
22D81DE3-73E3-4929-93B9-18BA2EF06D02.png
Hey Tom, I am using the OBD Fusion app and have posted many screenshots of what's going on. I was able to borrow a pre-built screen that a RAM forum member shared and it's what I use almost daily.

If you haven't found out already, once soot gets to 80% it will then start an Active Regen assuming the engine is fully warmed up.

Regen status 1 means it's regenerating - if the regen type is 0 then it's passively regenerating, if regen type is 1 then it's an Active Regen.

Here's a couple screen shots of mine when it's in Active Regen:


Jeep Gladiator Fusion OBD App 08FF9826-11FD-4DD4-9277-8234F581B643
Jeep Gladiator Fusion OBD App 5260B48B-2109-4383-BAFA-4C38A0DD28CF
 
OP
OP
TomPeak

TomPeak

Member
First Name
Tom
Joined
Feb 1, 2022
Threads
4
Messages
17
Reaction score
11
Location
Michigan
Vehicle(s)
2022 JTRD
Occupation
Land Surveyor
Hey Tom, I am using the OBD Fusion app and have posted many screenshots of what's going on. I was able to borrow a pre-built screen that a RAM forum member shared and it's what I use almost daily.

If you haven't found out already, once soot gets to 80% it will then start an Active Regen assuming the engine is fully warmed up.

Regen status 1 means it's regenerating - if the regen type is 0 then it's passively regenerating, if regen type is 1 then it's an Active Regen.

Here's a couple screen shots of mine when it's in Active Regen:


08FF9826-11FD-4DD4-9277-8234F581B643.png
5260B48B-2109-4383-BAFA-4C38A0DD28CF.png
Beerviper, I eventually figured it out and thanks for letting me know. We embark on another camping/tow adventure tomorrow. Into a headwind and 92+ degrees. Family is excited, Tom prepared to melt a turbine ?
 

rharr

Well-Known Member
Joined
May 6, 2021
Threads
29
Messages
2,025
Reaction score
2,771
Location
Tucson, AZ
Vehicle(s)
21 JTRD 3" RKK lift, (former) 95 XJ 5sp 8" lift
hmmph, 92 degrees, that a nice cool day, your fine. 115 is when it gets fun.
 
 







Top