Banks Derringer and Pedal Monster with an OBD splitter and Progressive Snapshot?

[Deleted member 57233]

Does anyone know if this will work? I just switched to Progressive for a massive discount and realized after I agreed to snapshot, my Banks stuff is using the OBD port.

Can I run a splitter and have the tuner and Snapshot dongle plugged in at the same time?

Sponsored

 

[Rusty PW]

Yep, you can.

 

[Hootbro]

On my 22 Gladiator, I ran a Banks Pedal Monster on a splitter that I tucked under the dash with a open port that worked fine for basic OBDII reader dongles. When I hooked up my Launch scanner that has the SGW bypass programming, it did not like having that Banks Pedal monster on the splitter at the same time and would not let me get in or clear some modules until I removed the Pedal Monster off the splitter. Same issue using Jscan.

If you ever take it in for service, I would recommend to make sure the Banks Pedal Monster is disconnected from any splitter.

 

[Chance575]

Do your own research, but do you mind your data (driving habits, trip duration, location and etc) being sold

 

[Deleted member 57233]

Do your own research, but do you mind your data (driving habits, trip duration, location and etc) being sold

That's already happening to anyone with a cell phone anyways. I mostly do the drive trackers because I usually drive less than 2,000 miles a year and it gets me big discounts.

 

[GladiatorPilot23]

Banks sells one with thick wiring to avoid possible signal lose.

Sponsored