How to mount Rotopac in bed?

[Coyotesong]

Looking for ways to mount a Rotopax in the bed. I dont have any bed molle panels. Not opposed to drilling the bad and mounting it right to the bed. Any suggestions?

Sponsored

 

[Zacfrac]

Do you have the trail rails? I have the Tacoma rail mount plate from the Rotopax website arriving today and am going to try that.

 

[1OffCraz]

If you have the trail rails, or builtright's rails, you can use this mount:

https://www.builtrightind.com/products/builtright-industries-mount-for-rotopax-mounting-system

 

[Zacfrac]

If you have the trail rails, or builtright's rails, you can use this mount:

https://www.builtrightind.com/products/builtright-industries-mount-for-rotopax-mounting-system

I think that’s for their bed rack? You could mount it with some T-nuts to the rails but it’d put the rotopax sticking above the top of the bed.

https://rotopax.com/toyota-nissan-truck-plate.html

I’m not sure if this one is going to work yet, but the nuts for mounting into Tacoma rails fit the factory trail rails, so crossing my fingers that the vertical height will be manageable to tuck a 2gal under the tonneau cover.

 

[Zacfrac]

So yeah that Toyota plate totally works.
Got some optimization to do with the bike mounts to maybe get it scooted in the corner more.
Also looks like you can mount it on the side behind the wheel wells still but I have too much crap there to mess with it at the moment.

 

[Coyotesong]

Don't have the trail rail.

 

[BigLizzard]

So yeah that Toyota plate totally works.
Got some optimization to do with the bike mounts to maybe get it scooted in the corner more.
Also looks like you can mount it on the side behind the wheel wells still but I have too much crap there to mess with it at the moment.

Im glad you tried this, I was looking to see if those same mounts fit.

 

[BigLizzard]

The roto pax do fit in the sides......but unfortunately not with my diamondback cover

Sponsored