Maximus-3 Gladiator Build [SEMA 2019]

[Captn_Obvious]

The Sports Bar rack is coming along nicely, still in the manufacturing phase. Best estimate 4-6 weeks until they are ready to ship.
We will try to develop and offer as many accessory mounts as possible.

@Maximus-3 Is there pricing available that you can share for the Sports Bar rack? Interested in it, and any accessory mounts for shovel, jack, traction boards.. not a whole lot, just a few offroad essentials - thanks!

Sponsored

 

[Maximus-3]

@Maximus-3 Is there pricing available that you can share for the Sports Bar rack? Interested in it, and any accessory mounts for shovel, jack, traction boards.. not a whole lot, just a few offroad essentials - thanks!

Only estimations at this point, but we are getting closer. Basically we have to wait for the first batch to be complete to get the total cost of goods analysis and final pricing. DM incoming.

 

[outcastjt]

Regarding the Sports Bar, I'd like to know if a RTT could be secured to it. If so, it would be perfect for daily use and have the capability to support the RTT with an added clamp here or there and at the same time having secured storage under the aluminum deck boards.

 

[Daddycorder's Gladiator]

I'm curios on this as well. Or they can include a detachable cross bar (U-shape) at the back of the low parallel bars with maybe c-clamp style quick release for when you need a full height rack. Then you can mount parallel bars on top for strength and be use for tents, lumbers, kayaks, etc. It will be the most useful sports rack on the market.

As for the aluminum panels, I hope it can't be remove from outside. So you can use it as a secured open bed cover (if that's a thing) when you lock the bed. Then maybe load the bed with air/water tight bins for storage.

 

[Moab]

I'm curios on this as well. Or they can include a detachable cross bar (U-shape) at the back of the low parallel bars with maybe c-clamp style quick release for when you need a full height rack. Then you can mount parallel bars on top for strength and be use for tents, lumbers, kayaks, etc. It will be the most useful sports rack on the market.

As for the aluminum panels, I hope it can't be remove from outside. So you can use it as a secured open bed cover (if that's a thing) when you lock the bed. Then maybe load the bed with air/water tight bins for storage.

I like your ideas very much. Hopefully Maximus is on the same wavelength.

 

[Daddycorder's Gladiator]

I like your ideas very much. Hopefully Maximus is on the same wavelength.

this is why until now I haven't bought any rack and cover and still putting my groceries inside the cab when doing two store at a time...I hope this wait is worth it...lol

 

[SoCal Gladiator]

Any new updates on the rack?

 

[erikthetex]

I'm interested in the rack - looks amazing @Maximus-3

 

[Minty JL]

Bumping this thread..........

I'm picking up a lightly used one this weekend.

Then the task of mounting some lights and antenna for a GMRS radio.

 

[ATL_Rubi]

Bumping this thread..........

I'm picking up a lightly used one this weekend.

Then the task of mounting some lights and antenna for a GMRS radio.

Okay so.... its been a couple weekends, no update here?

 

[Minty JL]

Okay so.... its been a couple weekends, no update here?

My bad homies!

I will upload some pics here in a few minutes

 

[Captn_Obvious]

W

My bad homies!

I will upload some pics here in a few minutes

Well done sir ~ VERY Nice!

 

[Minty JL]

And a follow on. Since there are no documented bed covers to work with this rack I decided you use some of my gray matter and build my own bed cover.

3/4" CDX plywood, x2 30" SS piano hinges, locking mechanisms from my old bed cover. And here's where I'm at right now.

It should damn near weatherproof once I get it covered and weatherstripping under it. It's light enough and modular so I can take it on and off in a matter of unlocking it and putting it in the garage

 

[ATL_Rubi]

@Minty JL Looks great! Can we talk about the overlay on your brake lights..?and the yellow tint?

 

[Minty JL]

Well my original tarp was not worth the effort or labor. So Raptor liner it is

Sponsored