MOPAR 2" coils installed, now a knock...

[The Yeti]

So kinda... just installed my Frankenstein parts. Swapped out the 2.5" spacers and shock extensions on my unit, (didn't know it was there when I got it, thought it was stock...) 2021 80th Anniversary JT. Removed the 2.5" spacers and stock coils. Replaced with MOPAR 2" coils, lower isolators, ordered the upper 'isolators' too (luckily, previous "nibs" were chopped off". Kept the 2.5" bumpstop spacers (PS seem to be either super close, or possibly even rubbing the coil in one spot now) and removed the shock extensions. All my findings seem to look like I removed a ReadyLift 2.5" SST kit. Left the rear alone other than the Rancho shocks I swapped the stockers for. Front part # RS77065 rear # RS77070. I did some research and these seem to be the ones that fit vs the specs...
Anyway... I have a knocking on The front passenger side all the sudden (notice it coming from under the floorboard PS side). I loosened and torqued the trac bar, LCA's and UCA's properly (with weight on the unit) and then went back to do the FR shock after I noticed the noise. Any thoughts.....?

Sponsored

 

[Rusty PW]

So kinda... just installed my Frankenstein. Swapped out the 2.5" spacers and shock extensions on my unit, (didn't know it was there when I got it, thought it was stock...) 2021 80th Anniversary JT. Removed the 2.5" spacers and stock coils. Replaced with MOPAR 2" coils, lower isolators, ordered the upper 'isolators' too (luckily, previous "nibs" were chopped off". Kept the 2.5" bumpstop spacers (PS seem to be either super close, or rubbing the coil now) and removed the shock extensions. All my findings seem to look like I removed a ReadyLift 2.5" SST kit. Left the rear alone other than the Rancho shocks I swappeed the stockers for. Front part # RS77065 rear # RS77070. I did some research and these seem to be the ones that fit vs the specs...
Anyway... I have a knocking on The front passenger side all the sudden (notice it coming from under the florboard PS side). I loosened and torqued the stabilizer bar, LCA's and UCA's properly (with weight on the unit) and then went back to do the FR shock after I noticed the noise. Any thoughts.....?

Hard to read the black script.