rubiryanjt
Active Member
- First Name
- Ryan
- Joined
- Apr 15, 2021
- Threads
- 3
- Messages
- 28
- Reaction score
- 52
- Location
- Grand Blanc, Mi
- Vehicle(s)
- 2020 JTR
- Occupation
- Self Employed
- Thread starter
- #1
Had it just under a year. Done everything myself.
Specs/mods:
2020 Rubicon, Granite Crystal Metallic
3.5" Clayton Offroad Overland lift with Fox 2.0 performance series shocks and stabilizer.
37"x12.5/17 Nexen Roadian MTs on Black Rhino Warlords
Tyger Auto roll bar
Factory bumpers with winch guard added on
Apex 12K winch
4" LED lights on bumper, pillars, and rollbar
"Midnight sun" vinyl wrap and black tribal stripe
All factory badges changed over to matte black
Tazer MIni
Ebay tube doors
Inside I swapped the 4" speakers for JBL GX602 6.5's using SSV adapters in the soundbar and Metra pods in the dash. I replace the factor tweeters with Skar Audio tweeters. Running 2 10" Skar Audio 10s in a BRP box under the seat.
I have Ram mounts everywhere. I made a custom windshield mount with some 3D printing and RAM suction mounts for my Icom ID5100 Ham radio and used more Ram mounts for my Wouxun KG-1000G GMRS. I also designed custom mounts for the front of the bed for my antennas. I used magnetic mounts for the remotes on the side of the center console, on yet another ram mount.
I still have a lot planned. I have black factory hooks for the front and rear to install. Looking at different head units. Going to tint the tail lights.
And I actually wheel it and use it for work and towing as well!
Specs/mods:
2020 Rubicon, Granite Crystal Metallic
3.5" Clayton Offroad Overland lift with Fox 2.0 performance series shocks and stabilizer.
37"x12.5/17 Nexen Roadian MTs on Black Rhino Warlords
Tyger Auto roll bar
Factory bumpers with winch guard added on
Apex 12K winch
4" LED lights on bumper, pillars, and rollbar
"Midnight sun" vinyl wrap and black tribal stripe
All factory badges changed over to matte black
Tazer MIni
Ebay tube doors
Inside I swapped the 4" speakers for JBL GX602 6.5's using SSV adapters in the soundbar and Metra pods in the dash. I replace the factor tweeters with Skar Audio tweeters. Running 2 10" Skar Audio 10s in a BRP box under the seat.
I have Ram mounts everywhere. I made a custom windshield mount with some 3D printing and RAM suction mounts for my Icom ID5100 Ham radio and used more Ram mounts for my Wouxun KG-1000G GMRS. I also designed custom mounts for the front of the bed for my antennas. I used magnetic mounts for the remotes on the side of the center console, on yet another ram mount.
I still have a lot planned. I have black factory hooks for the front and rear to install. Looking at different head units. Going to tint the tail lights.
And I actually wheel it and use it for work and towing as well!
Sponsored
Last edited: