Warn Crawler Stubby Front Bumper

[v0mitus]

During my search for my front bumper I couldn't find any pictures with the Warn Crawler Stubby installed. So I figured that I would show these off so maybe someone down the line will search and find this helpful.

Sponsored

 

[v0mitus]

Also Ill post some with the winch installed once I get around to taking pictures of it

 

[Vtur]

Good looking bumper.

 

[RubiNewbCB]

Also Ill post some with the winch installed once I get around to taking pictures of it

Does the winch sit on top or down low between the rails?

 

[v0mitus]

Does the winch sit on top or down low between the rails?

Sits on top.

 

[HorsesRear]

That is a great looking bumper and I like that you can still use your fog lights.

 

[v0mitus]

Here is the bumper with a winch installed. The winch cover fits a little wonky.

 

[pharmfrank]

A bit off topic I suppose but this is my 2020 Overland with the FULL width Warn Crawler front
bumper, skid plate and mounted Warn 9.5 XP winch, you may use for comparison. To me a big
plus for the Warn bumper was the hoop is welded on and not bolt-on, but after a maybe 2
month wait (back in 2021) imagine my surprise when it arrived and said it was made in Russia !
Yes steel items were harder to come by back in 2020 and I had to wait to get my steel wheels
and bumper. Rear bumper by the way is a Fishbone and I'm unsure of country of origin.

 

[v0mitus]

A bit off topic I suppose but this is my 2020 Overland with the FULL width Warn Crawler front
bumper, skid plate and mounted Warn 9.5 XP winch, you may use for comparison. To me a big
plus for the Warn bumper was the hoop is welded on and not bolt-on, but after a maybe 2
month wait (back in 2021) imagine my surprise when it arrived and said it was made in Russia !
Yes steel items were harder to come by back in 2020 and I had to wait to get my steel wheels
and bumper. Rear bumper by the way is a Fishbone and I'm unsure of country of origin.

I don't think they make the stubby with the grill guard tube anymore. Or at least from what I was able to find. I did see somewhere that at one point this bumper came from Russia, but I don't think that is the case anymore. What's funny is when the bumper was delivered to my house is it was just wrapped in shipping tape and foam on a wooden pallet. So I'm not sure where the country of origin is on this one, but I'd imagine its China

 

[pharmfrank]

Yes I seem to recall layers upon layers of corrugated cardboard and miles of foam tape, torn here
and there in shipping but not a bolt or nut lost. I thought the Crawler series evolved into the Elite
series, I am sure I had to order the skid plate for the Elite series as the Crawler one had been
discontinued. I didn't save all my references so I have to trust my old man's memory (79). It is
difficult to find sources sometimes as suppliers do not like to share it seems and in a 'world'
economy changes can happen daily (dare I mention tariffs). If my physicians would allow me
to weld making my own could be a hoot, but with my implanted electrical devices that is a no-no.
As I've said before, patience, these are all costly ad-ons. BTW 64K mi and 5 yrs later and the Warn
is holding up nicely despite NE salted roads, winch fit perfectly as I thought it would.

Sponsored