Where would you splice?

[PhotoWrangler]

I’m adding an LOC for an aftermarket amp/sub, and using quick splice clips for the signal. Where would you splice?

Here on the main speaker wires of the B pillar?

Here on the main line in the speaker bar?

or here just behind the plug of the mid size speaker?

Sponsored

 

[brancky3]

I had mine connected to the passenger side b pillar before I added a 4 channel amp with the PAC module.

 

[PhotoWrangler]

I had mine connected to the passenger side b pillar before I added a 4 channel amp with the PAC module.

I don’t think I need the PAC module.

I’m only adding a 2 channel LOC, since the factory system is staying the same.

 

[brancky3]

I don’t think I need the PAC module.

I’m only adding a 2 channel LOC, since the factory system is staying the same.

Yep, you're right! If you're only adding a sub I would do the b pillar as it's much less wire to run.

 

[LiftedrubiconJT]

Which loc are you using and subwoofer box? Looking to add a subwoofer to mine

 

[PhotoWrangler]

Which loc are you using and subwoofer box? Looking to add a subwoofer to mine

They're old. It's a Pioneer shallow mount 10", and a Pioneer GMT3500 400w amp I think. I had them in my 2013 JK and they've just been sitting in storage.

I used the Scoche LOC90. Seems to be a quality LOC. Everything works perfectly.

My sub box, which is relatively small compared to others, still doesn't fit in the storage under the back seat. I'll either have to remove the storage, or find a smaller sub. Not sure what I'm going to do yet. Right now it's just sitting on the floorboard on the pass side.

Sponsored