Will the RC front control arm relocation kit work well w/ 2.5" spacer leveling kit?

[masonstoltzfus]

I am planning on installing a RC 2.5" spacer leveling kit and front control arm relocation kit on my on my '22 JT. These control arm relocators are typically used with taller lift kits; does anyone have experience running them with a 2.5" or less lift? My goal is to get as smooth of a ride as possible, but am wondering if these brackets would lower the arms so much that it could be harmful in some way or prevent proper alignment. Thanks for the help.

Sponsored

 

[kevman65]

The geometry correction brackets are made to correct control arm angle and caster.
They don't care what caused the lift, be it springs or spacers.
Most I've seen have a location for 2-3" of lift and 3-4" of lift.