Universal Jeep Door Hanger by Exceed Fabrication Now Available

https://exceedfab.com/products/universal-jeep-door-hanger-4pcs

• 11 guage (3mm) steel plate, powder coated
• EVA scratch-resistant
• Stainless steel removable logo plate
• Each set contains four door hangers
• Comes with all installation hardware, a total of four packages of installation hardware packages, each package contains: Drywall anchor*6, stainless steel self drilling screw*6, stainless steel washer*6
• For safety, we recommend installing at least three screws

Does it only hold one door?

Of course! This is its main purpose!
We have tested it with many doors, here are some references
Please note that the steel logo plate on these photos is a prototype, please take the style on our website as the final

JBlack23323 said:

Does it only hold one door?

Click to expand...

If you mean the OEM door, yes.
If you have some tube doors with 1-inch diameter pipes, you can also try putting two at the same time.
Below are its dimensions

This is a great suggestion!
We haven't noticed this problem before, not sure how many people encounter it, maybe a length of bicycle inner tube can cover it?

Exceed Fabrication said:

Of course! This is its main purpose!
We have tested it with many doors, here are some references
Please note that the steel logo plate on these photos is a prototype, please take the style on our website as the final

Click to expand...

Simple and effective.

From what I can see the set of 4 is only $43. I have to say I'm shocked. It's a simple piece, but looks well made (although I agree to mounting bolts need a pad to cover them) and that's a very down to earth price. Rare in the Jeep accessory world. Thanks. I'll order a set and give them a try. For that price, there's very little to lose and a lot of convenience to gain.

Are the US made?

John in the Woods said:

From what I can see the set of 4 is only $43. I have to say I'm shocked. It's a simple piece, but looks well made (although I agree to mounting bolts need a pad to cover them) and that's a very down to earth price. Rare in the Jeep accessory world. Thanks. I'll order a set and give them a try. For that price, there's very little to lose and a lot of convenience to gain.

Are the US made?

Click to expand...

Thank you John for liking our product!

Here is some information I can provide, hope it can help you!

1. The cost composition of these hangers (4pcs) is:

Production cost: $20.31 (steel plate, laser cutting & bending, drilling, powder coating, EVA cover, brushed stainless steel logo, mounting hardware, carton packaging)
Shipping cost (including tariff): $19 (Canton factory to California warehouse $6, California warehouse to customer $13, average)
Shopify&Paypal transaction fee: $3 (about 7% of the product price)
So for each hanger sold, our profit is $0.68

This does not include the costs of returns, after-sales and other unexpected situations, nor does it include any advertising costs（Usually 25-35% of the selling price）. Obviously, if these are counted, these hangers are not profitable.

2. The reason I set the price so low is that I hope this product can give more people a chance to try us, because not everyone is willing to spend $700+ on an unfamiliar brand to try their tube door.

Maybe make some simple products to give us an entry ticket. So I don't care if these hangers have real profits.

3. If you browse Amazon, there are hangers with lower prices than ours (some are about $20-30 as I remember) because they have a larger scale advantage. You pay more for EF to get better after-sales support, higher quality installation hardware, more transparent information, in short, pay for peace of mind. We have proved this in tube door after-sales.

4. As I mentioned earlier, we are in Canton, so these are made in China

Exceed Fabrication said:

Thank you John for liking our product!

Here is some information I can provide, hope it can help you!

1. The …

Click to expand...

Yes, I remember the tube door thread now. You’ve been very upfront and down to earth about everything, and proved it again here. Thanks.

I run doorless a lot, so I’ll grab a hangar set and give them a try. If there as good as the deal seems, then you’ll be first in line if I ever consider tube doors. I appreciate the dialogue and engagement here; smart business from any part of the world.

Anything less than $50 is immediately suspect to a jeep owner.

Great Offender said:

Anything less than $50 is immediately suspect to a jeep owner.

Click to expand...

I'm not sure if IKEA does the same thing in the US.

But in China, they sell an ice cream for only $0.14, and the quality is the same as ice cream that costs several times more elsewhere, to tell all customers that their products are cheap and good.

These door hangers and cowl mounted pod brackets are the 'ice cream' we sell

I'm also looking forward to someone receiving these and posting some real reviews

Exceed Fabrication said:

I'm not sure if IKEA does the same thing in the US.

But in China, they sell an ice cream for only $0.14, and the quality is the same as ice cream that costs several times more elsewhere, to tell all customers that their products are cheap and good.

These door hangers and cowl mounted pod brackets are the 'ice cream' we sell

I'm also looking forward to someone receiving these and posting some real reviews

Click to expand...

I meant no disrespect to the product itself and I admit that I bookmarked you. I was merely having a laugh at the crowd that believes the more excessive the price, the better it is. Honestly it looks like a solid, affordable investment!