Falcon Nexus Stabilizer on Larger Tie Rod

[jnack]

I have the Adjustable Falcon Stabilizer, currently using the tie rod clamp that fits the stock tie rod, but I'd like to upgrade to a larger diameter Tie Rod...was looking at the Yeti XD Pro Aluminum which is 1.75" or some other options in the 1.75-2" range.

It seems that the falcon stabilizer is not compatible with universal tie rod clamps.

Has anyone figured out an option to run the Falcon Stabilizer with thicker tie rods?

Sponsored

 

[Lunentucker]

https://www.rustysoffroad.com/produ...r-tie-rod-clamp-steering-ram-stabilizer-mount

https://www.rpmsteering.com/175-ID-Heavy-Duty-6-Bolt-Stabilizer-Clamp_p_555.html

 

[jnack]

https://www.rustysoffroad.com/produ...r-tie-rod-clamp-steering-ram-stabilizer-mount

https://www.rpmsteering.com/175-ID-Heavy-Duty-6-Bolt-Stabilizer-Clamp_p_555.html

the falcon stabilizer doesn't attach the same way as the OEM and fox stabilizer so I don't believe those will work

 

[Rubi-Zero]

Look at Apex chassis
They make both sizes for the falcon

 

[Rubi-Zero]

Here you go.
https://apexchassis.com/collections...oducts/dc106-damper-clamp-falcom-stabilizer-2

https://apexchassis.com/collections...c110-damper-clamp-falcon-stabilizer-1-75-inch

 

[jnack]

Here you go.
https://apexchassis.com/collections...oducts/dc106-damper-clamp-falcom-stabilizer-2

https://apexchassis.com/collections...c110-damper-clamp-falcon-stabilizer-1-75-inch

this is exactly what i needed, thank you!

 

[bleda2002]

the falcon stabilizer doesn't attach the same way as the OEM and fox stabilizer so I don't believe those will work

Rpm steering has fox ats or falcon options on the posted links.

 

[jnack]

Rpm steering has fox ats or falcon options on the posted links.

ahh i didn't see you had to add it as an option..thanks!

 

[Mojaveon40s]

I’m going to have this problem too. I had the N3 Rough Country steering stabilizer on mine, but it’s in the shop now getting the Artec axle trusses installed. With how the trusses mount, the N3 will no longer fit so I’m adding the Falcon Nexus EF 2.2 steering stabilizer with the stock tie rod. After trusses I’m swapping gears and after that, I’m planning to beef up my steering. I was concerned the Falcon for the stock tie rod wouldn’t fit a larger diameter tie rod down the road and it’d be a waste of money to buy a new stabilizer at that point.

Did you make it work?

Sponsored