Brand New VRS Bed Rack System by KB Voodoo! (photo heavy)

[KB Voodoo]

Great info, love the look. Have you fitment tested any retractable tonneaus such as Pace Edwards, Roll n Lock? These look to have a partial Tslot, not full length

All of those covers are compatible!!

Sponsored

 

[KB Voodoo]

Cargo Access Door and Sliding Cargo Tray

 

[GobiExploring]

Is it possible to see pictures of the inside of the storage compartments? Thank you.

 

[KB Voodoo]

Is it possible to see pictures of the inside of the storage compartments? Thank you.

Here you go.

 

[GobiExploring]

Here you go.

Thank you. On a 22” rack can you stack two on top of each other? Can you mount other things to the tent cross bars?

 

[KB Voodoo]

Thank you. On a 22” rack can you stack two on top of each other?

We've never considered that, but I took a look, and indeed you can!!

So that means you could fit as many as eight Gear Lockers on one 22" VRS rack

Can you mount other things to the tent cross bars?

Yes, you can mount many other things to the tent bars.

 

[GobiExploring]

We've never considered that, but I took a look, and indeed you can!!

So that means you could fit as many as eight Gear Lockers on one 22" VRS rack



Yes, you can mount many other things to the tent bars.

I really appreciate your reply’s. Really leaning towards your rack.

 

[KB Voodoo]

These pics show how the VRS mounts to a tonneau cover with built in T-tracks, like the RetraxONE XR.

 

[Sigz]

Bed rack is installed! I had to use an angle grinder and shave some of the posterior portion of the voodoo bar to get my tonneau cover on but it works perfectly.

I was sort of a pain in the ass to install. Nothing against the KbVoodoo brand or anything - but there are a ton of little nuts and bolts to hand tighten together. I accidentally stripped or tightened down some nuts not compelelte straight and had to drill them out but a quick run to the store replaced those.

The only negative thing I can say about the rack - is not much. The KbVoodoo badge was off on one of the rails when I opened the package - but that's about it.

the RC Tonneau cover will NOT flip open onto itself, but will open up to access the bed and close shut for security.

Will probably change to a rolling tonneau in the future.

Ask me some questions if ya have any!

@KbVoodoo - so about that rear hatch/door..... :D

 

[KB Voodoo]

The only negative thing I can say about the rack - is not much. The KbVoodoo badge was off on one of the rails when I opened the package - but that's about it.

Can you email us about that? Each Voodoo Rail should have a stainless steel nameplate mounted to it.

[email protected]

 

[Sigz]

Can you email us about that? Each Voodoo Rail should have a stainless steel nameplate mounted to it.

[email protected]

Yeah sure I’ll do it in the morning. Basically the name plate was off of it when I opened everything. It’s intact, it just somehow came off the rack.

 

[KB Voodoo]

We installed our Truxedo PROX15 cover on the 22" VRS, no modifications necessary.

I still need to smooth out some wrinkles though.

 

[Beach Buggy]

At this time the VRS is not compatible with the MOPAR cover. The reason is that the cover is too wide to fit within the Voodoo Rails.

When designing the system, we wanted the Voodoo Rail to be flush to the outside of the bed sides, this meant that some covers would be too wide.

We may make a wider Voodoo Rail for wider covers. If we do, it will overhang the bed sides and it won't be as aesthetically pleasing, but it may be worth it for the additional functionality.

On the JT, a Voodoo Rail wide enough for the MOPAR cover would overhang the bed side by 1 inch. If anybody has any opinions about the look of that, feel free to chime in!!

I would certainly be interested in that. I really like the look and simplicity of the Mopar Tonneau cover, plus I already have one. The ability to add a rack system while retaining the factory cover seems to be the Holy Grail.

 

[KB Voodoo]

Playing around with different configurations on our JT.

We added our Top Mount Accessory Panel and Molle Panels.

We also mounted our Sliding Cargo Tray and an 8 gallon WaterPort to the lower bars of the rack.

https://www.kbvoodoo.com/vrs-bed-rack-accessories/vrs-top-mount-accessory-panel

https://www.kbvoodoo.com/vrs-bed-rack-accessories/vrs-molle-panel

 

[SSinGA]

If you could mount the 1Up add-on tray to the lower bar along the bed rail, that would be a sweet way to carry a bike. Lower and without removing the front wheel!

Sponsored