Turn lights, DRLs

[jwassdo]

Please help! I have a 2020 sport S with the standard lighting package. I swapped out the headlights for LEDs and changed the turn signal bulbs to the Oracle 5011-001.

The passenger side works perfectly. The driver's side DRL only works sometimes. It's on when the headlights are on and when I set the dial to DRL or the second setting but if it's on the off setting or if it's on automatic and the headlights come are off it doesn't work. Anyone have any ideas?

Thanks, folks!!

Jeff

Sponsored

 

[Hootbro]

Probably need a scan tool like JScan or a Tazer to change the BCM light settings to show that they are LED instead of incandescent.

Direct bulb swapping to LED's can be problematic.

 

[22EcoDs]

Tazer

 

[jwassdo]

I have a Jscan, I don't understand how one side can work well but not the other, but I guess this is a good suggestion. I'll give it a try. Thank you

 

[Kevin_D]

After I programmed mine to LED for the turn/DRL, the only time I've had issues was due to a faulty/failing LED lamp.
Just because the lamps are new doesn't mean they aren't faulty.
If it still acts up after programming, try swapping the bulbs left to right.

Kevin

 

[jwassdo]

After I programmed mine to LED for the turn/DRL, the only time I've had issues was due to a faulty/failing LED lamp.
Just because the lamps are new doesn't mean they aren't faulty.
If it still acts up after programming, try swapping the bulbs left to right.

Kevin

Looking through the jscan options for the DRLs, it's the "dedicated LED DRL present/not present option, right? I don't need to mess with the "left" or "right dedicated DRL present" or any of the voltage settings, right?

Jeff

 

[Klicht87]

Looking through the jscan options for the DRLs, it's the "dedicated LED DRL present/not present option, right? I don't need to mess with the "left" or "right dedicated DRL present" or any of the voltage settings, right?

Jeff

I believe so. I didn't change any voltage settings. I'll check later and verify

Sponsored