Poison Spyder Hood Louver Panel

[EOS311]

Does anyone Happen to have a copy of the installation instructions for the Poison Spyder non Rubicon hood louver panel? It is part # 19-53-010P1. I have contacted The people that call themselves Poison Spyder since they were bought out and they are no help. They say that all the instruction files were not released when they shut down the facility and had no other suggestions for me. I have searched the interwebs for 2 weeks looking for a PDF file or a install video with no luck. They are not producing these anymore and the only one I could find was on the display wall at the 4WP in El Paso. After a few days of begging and pleading with the store manager, he was able to find a replacement product for the empty hole on his display wall and agreed to take it down and ship it to me. He still had the louver panel, cutout stencil and hardware but could not locate the installation instructions or the original box. There are multiple install videos for the Rubicon style hood but none for the non Rubicon hood. I am aware that most of the earlier year model jeeps had the instructions printed on the actual cutout stencil but that is not the case with this particular product. The cutout stencil appears to be a solid black decal that will need to be applied to the hood before any cuts are to be made. Any help would be greatly appreciated.

Sponsored

 

[Great Offender]

I ran a quick search and was able to come up with a video install which I did not watch so cannot confirm how good it is -

Here's another -

Here is a link to a PDF download from Extreme Terrain - https://lib.extremeterrain.com/guides/J106704-manu.pdf

Hope they help!

 

[Puch]

I ran a quick search and was able to come up with a video install which I did not watch so cannot confirm how good it is -

Here's another -

Here is a link to a PDF download from Extreme Terrain - https://lib.extremeterrain.com/guides/J106704-manu.pdf

Hope they help!

No promises, but I’ll check when I get home. I might have kept mine? Installed it on a 2020 sport.

 

[EOS311]

I ran a quick search and was able to come up with a video install which I did not watch so cannot confirm how good it is -

Here's another -

Here is a link to a PDF download from Extreme Terrain - https://lib.extremeterrain.com/guides/J106704-manu.pdf

Hope they help!

These are both for a JK. I need a video for either a JL or a JT. Thank you for looking.

 

[EOS311]

No promises, but I’ll check when I get home. I might have kept mine? Installed it on a 2020 sport.

I will keep my fingers crossed. At this point, I feel like the only way I can get them is on the chance that someone didnt toss them when they were done.

 

[Great Offender]

These are both for a JK. I need a video for either a JL or a JT

I did a really quick search. Unfortunate that it didn't work and I wasn't thorough - but I have to pretend I'm "working" from home

 

[Minty JL]

No workie on the Mojave

 

[Puch]

Will this help?

 

[EOS311]

Will this help?

I owe you a beer or two. It's a bit of a drive but if you are ever in Oklahoma, hit me up. Thank you. I have been stressing about this for a week or so.

 

[Puch]

I owe you a beer or two. It's a bit of a drive but if you are ever in Oklahoma, hit me up. Thank you. I have been stressing about this for a week or so.

No problem. Good luck with the project. They mention not to over tighten the screws. FYI it’s easy to over tighten them and deform the hood. I was working in poor light. After I reinstalled the hood I noticed all kinds of wavy spots around the vent panel when I was in sunlight. I had to remove the hood, remove the insulation pad, and go back and adjust each screw to get the waves out. The pain in the ass part is that each screw/nut seemed to require a different amount of pressure/torque.
Not to mention I had about 2k miles on my JT at the time and I was freaking out thinking that I had to buy a new hood!
Take your time. I’m sure it will look great.

Sponsored