Removed Roof / Holes on lip

[Reddjeep]

Hey all, just took the roof off and will be keeping it off for a while. There are a bunch of holes on the lip behind the roll bar (some where the bolts secure the roof were).

Anyone know if there are plugs or whatnot for these holes. Maybe even orange for the Mojave?

Sponsored

 

[ATL_Rubi]

There’s a few companies that sell upgraded bolts for the holes, sort of an aesthetic bolt that is larger, knurled, and colored. Can’t remember the names but they’re out there.

Edit to add: https://www.rockworkx.com/collections/jeep-hard-top-quick-removal-bolts

 

[Shift Happens]

Do you mean the holes that are for the plastic pieces in the hard top? the ones without threads?
Napa has a few options that might fit but I don't have measurements to see if there's anything online somewhere that would work

 

[Reddjeep]

Yes. Both for the nuts and open holes. I ordered the ones linked above and with just use push plugs for the ones that aren't threaded. I'll post pics once I do

 

[whysoserious]

There’s a few companies that sell upgraded bolts for the holes, sort of an aesthetic bolt that is larger, knurled, and colored. Can’t remember the names but they’re out there.

Edit to add: https://www.rockworkx.com/collections/jeep-hard-top-quick-removal-bolts

I hate it when people post links to bitchin stuff on this forum, which then causes me to purchase said "bitchin stuff". Damn it!!!

 

[Reddjeep]

Lol. Had no idea id spend 70 bucks today on friggin bolt covers. ?

 

[wlinn1]

I hate it when people post links to bitchin stuff on this forum, which then causes me to purchase said "bitchin stuff". Damn it!!!

Well dang!! Ditto. But not only for mine…. But my wife’s and daughters JT’s. But they ain’t getting them till Christmas!!! They can drool and think I’m mean until then!

 

[Shift Happens]

I've been lucky as to not need those since I carry around a battery powered ratchet so having the bolt covers actually takes me more time to get the top off.
I still really want them though, they look so good!

 

[AstroZombie]

BRUH!!

 

[AstroZombie]

I've been lucky as to not need those since I carry around a battery powered ratchet so having the bolt covers actually takes me more time to get the top off.
I still really want them though, they look so good!

i do this too. You will still need to have eth tool for the bolts under the freedom top part though.

 

[Shift Happens]

i do this too. You will still need to have eth tool for the bolts under the freedom top part though.

Not sure what you mean. The bolts that connect the hard top to the roll bar, that are only able to be accessed with the freedom panels off?
What other tool would I need?

 

[AstroZombie]

Not sure what you mean. The bolts that connect the hard top to the roll bar, that are only able to be accessed with the freedom panels off?
What other tool would I need?

I was referring to the thumb screws. They look like there are designed to replace the torx bolts that hold down the hard top. A nice feature to have but you still have the 2 on teh roll bar. That's all i was referring too. You will still need a tool

 

[Shift Happens]

I was referring to the thumb screws. They look like there are designed to replace the torx bolts that hold down the hard top. A nice feature to have but you still have the 2 on teh roll bar. That's all i was referring too. You will still need a tool

ooooooh now I understand. Yessir

 

[Reddjeep]

Put them on. Looks really good. There are also holes on the pillar by the back. I put the push covers in them. There's an assortment of them I got from Amazon.

Sponsored