What can we do for you?

[AllMoparParts.com]

I am looking for the Mopar OEM LED headlights and LED fog lights and their installation guide. I have a 2023 Gladiator Rubicon that came with halogen lights.

Hi Josh,
There is no ETA on the mopar kit https://www.allmoparparts.com/sku/82215136ad.html

Here is the installation link https://www.allmoparparts.com/docs/82215136AD.pdf

I will send you a code you can use to pre-order. Please let me know if you have any other questions.
Thanks,
-Benny

Sponsored

 

[KevinM60]

Hi Benny,
I got this off your "Gladiator Mojave Part Numbers # List" Thread post #53

"There are multiple parts to the camera and mounting itself which I have linked below. Note in no way are we inferring this is plug and play but I understand there are other threads here discussing what is involved, I would suggest you research them thouroughly."

https://parts.allmoparparts.com/oem-parts/mopar-camera-68436466aa
https://parts.allmoparparts.com/oem-parts/mopar-camera-bracket-68396526ab
x2 https://parts.allmoparparts.com/oem-parts/mopar-screw-68090949aa
x2 https://parts.allmoparparts.com/oem-parts/mopar-push-nut-6510197aa
https://parts.allmoparparts.com/oem-parts/mopar-texture-grille-6qn21rxfab

Are you able to tell me if this hardware is compatible with my Mojave and if I need any other hardware such as power or video cables to complete the assembly?

VIN 1C6JJTEG1PL539686


Thanks in advance

 

[ecidiego]

When you are able to, can you compare the part #s for 2020 - 2023 Mojave springs and 2024 Mojave X springs? I've added the OEM steel front and rear bumpers and I am betting Jeep used a stronger spring on the Mojave X that would probably complement my setup. I doubt the shocks are different.

 

[Reddout99]

I'm interested in the Mopar Tri-Fold Hard cover for my 2021 Gladiator and have a couple of questions:

- On another site, when looking at the cover they had for sale, there were 2 different installation instructions, built before March 15, 2020 and after. I'm assuming mine would be the later

- Doing my research I have read some reviews, perhaps early reviews, of a problem area between the top of the tailgate and the back off the cover where it meets the tailgate. Apparently water or freezing rain can get in this area making impossible to open the tailgate, "freezing" the 2 together.

Has this issue been resolved?

Thanks

 

[AllMoparParts.com]

Hi Benny,
I got this off your "Gladiator Mojave Part Numbers # List" Thread post #53

"There are multiple parts to the camera and mounting itself which I have linked below. Note in no way are we inferring this is plug and play but I understand there are other threads here discussing what is involved, I would suggest you research them thouroughly."

https://parts.allmoparparts.com/oem-parts/mopar-camera-68436466aa
https://parts.allmoparparts.com/oem-parts/mopar-camera-bracket-68396526ab
x2 https://parts.allmoparparts.com/oem-parts/mopar-screw-68090949aa
x2 https://parts.allmoparparts.com/oem-parts/mopar-push-nut-6510197aa
https://parts.allmoparparts.com/oem-parts/mopar-texture-grille-6qn21rxfab

Are you able to tell me if this hardware is compatible with my Mojave and if I need any other hardware such as power or video cables to complete the assembly?

VIN 1C6JJTEG1PL539686


Thanks in advance

Hi Kevin,
Short answer is yes you will need other parts to make this work, Please checkout this thread https://www.jlwranglerforums.com/fo...trail-camera-to-gladiator-diy-writeup.111134/


- Benny

 

[AllMoparParts.com]

Hi Chris, Here is the 21 info. I am unable to find a 24 VIN, If you can please pass one along and I will look em up

21 Mojave
68442569AA
68442570AA
68442574AA
68442575AA

-Benny

 

[AllMoparParts.com]

I'm interested in the Mopar Tri-Fold Hard cover for my 2021 Gladiator and have a couple of questions:

- On another site, when looking at the cover they had for sale, there were 2 different installation instructions, built before March 15, 2020 and after. I'm assuming mine would be the later

- Doing my research I have read some reviews, perhaps early reviews, of a problem area between the top of the tailgate and the back off the cover where it meets the tailgate. Apparently water or freezing rain can get in this area making impossible to open the tailgate, "freezing" the 2 together.

Has this issue been resolved?

Thanks

Hi Bob,
I would need your VIN to determine which one would be correct. I was not aware of any freezing issues so I cannot really comment on that. We sell a few here and there and I have personally never dealt with that.

- Benny

 

[Reddout99]

Thanks for the reply.
VIN: 1C6HJTAG9ML514356
This is a video I found today regarding the freezing issue I spoke about, but have read about it as well

 

[AllMoparParts.com]

Thanks for sharing the video. based on the part number's info I do not believe any product changes/revisions were made. I'm wondering if a ceramic coating would help in that area to prevent freezing together.

In regards to your VIN and production date you are correct, You have a late production therefore this one would be used https://www.allmoparparts.com/sku/82215615.html

Please let me know if you have any other questions.
Thanks,
-Benny

 

[Reddout99]

Thanks for sharing the video. based on the part number's info I do not believe any product changes/revisions were made. I'm wondering if a ceramic coating would help in that area to prevent freezing together.

In regards to your VIN and production date you are correct, You have a late production therefore this one would be used https://www.allmoparparts.com/sku/82215615.html

Please let me know if you have any other questions.
Thanks,
-Benny

Thanks, I was looking for the trifold hard cover actually

 

[AllMoparParts.com]

Got it, The part # you'd be looking for is 82216372AD then. We don't offer these as they need to be shipped truck freight at costs of 3-400 dollars which negates any online savings. If you still wanted to purchase this online we can help. I would need some information from you such as your email address and ship to address. Feel free to PM me if you would like.

Thanks,
- Benny

 

[KevinM60]

Hi Kevin,
Short answer is yes you will need other parts to make this work, Please checkout this thread https://www.jlwranglerforums.com/fo...trail-camera-to-gladiator-diy-writeup.111134/


- Benny

Thanks for the link, Benny. ?
What I'm trying to find out is if my factory installed Parkview system with the backup camera will support adding the front trail camera or if I have to replace the video processor. I think that may be the biggest cost.

 

[AllMoparParts.com]

Thanks for the link, Benny. ?
What I'm trying to find out is if my factory installed Parkview system with the backup camera will support adding the front trail camera or if I have to replace the video processor. I think that may be the biggest cost.

From what I can tell only vehicles with trail cams have video processors meaning its required to add but send me your VIN and I will double check.

- Benny

 

[KevinM60]

From what I can tell only vehicles with trail cams have video processors meaning its required to add but send me your VIN and I will double check.

- Benny

here you go
1C6JJTEG1PL539686
I tried to figure it out from my build sheet but some of the items are listed as modules and I don’t know what those include.

thanks for your help Benny

 

[AllMoparParts.com]

Hi Kevin,
No module is present so you would need to add it. I did not read through the DIY thread but I assume this is mentioned in there.

- Benny

Sponsored