Bed rack that works with Tonneau cover

[Jerhemi]

Just installed the new @Max Modular 18" Aluminum rack with the steeper sides that they made specifically for the JT. Very happy with the product support I recieved from them. They checked their computer model to see if my cover would have a chance of flipping open and it does! Quality was great and they send a paint pen out for any installation mishaps .

If you have a cover that mounts to the two bolts towards the rear of the inside rail, you'll want to get their their "Mopar Brackets" so you can shift the rack backwards to center it more on the bed. I have the Ultra Flex Tri Fold Cover and it opens with ease for the first two flips and allows the cover to be buckled to the cover's clips. You'll also want some 3M weather stripping to help seal the cover back down on the top bed rails. I used 1/4" and it has worked well. The rack does have a whistle at around 35mph to 45mph. Not too loud but if you don't have music on, you'll notice it. Oh, and don't order the awning mount they have currently unless you want to bend it yourself to get it to sit properly. That bracket is made for their racks with more angle on the sides.

The rack looks great!

I am having the hardest time picking one. So far, this MM unit is the closest to fitting my needs. I wish it was heigh adjustable

Sponsored

 

[Coldjensens]

I just talked with Chad from Rock Hard 4x4 They have a very nice looking tubular rack system. They are developing a rack that will accommodate the Mopar hard cover, but it will require drilling the rails.

 

[TRUKD]

I just talked with Chad from Rock Hard 4x4 They have a very nice looking tubular rack system. They are developing a rack that will accommodate the Mopar hard cover, but it will require drilling the rails.

Have you seen our stuff before?

Our racks work great with the roll up and tri-fold Mopar covers.

Sponsored