Mopar 2' lift plus spacer to be level with winch bumper

[mtudb24]

My 2021 has the dealer installed Mopar 2" lift. Most if not all of the rake is gone (maybe 1/4 - 1/2 inch is left). Ended up with Synergy Track bar (had to grind some of the mount down to make it work on the axle side)

Getting ready to add my Q-Tec QRC bumper with winch and Daystar 3/4" spacer in the front to make the sure the rake doesn't come back. I dont mind re-adjusting the trackbar again, but am I gonna have to look at Front shock relocation brackets to make up the 3/4 of an inch or whateve it turns out to be.
Thanks
Todd

Sponsored

 

[JBOverland]

Good looking truck. Sorry I don’t have any actual experience in your concern but only what I have been told and that is not worth much. Really do like what you have don’t though.

 

[Deleted member 35865]

What size tire are you running with after the 2" lift? Getting ideas for my new Willys.

 

[mtudb24]

What size tire are you running with after the 2" lift? Getting ideas for my new Willys.

35/12.50/17

 

[Casreyn]

My 2021 has the dealer installed Mopar 2" lift. Most if not all of the rake is gone (maybe 1/4 - 1/2 inch is left). Ended up with Synergy Track bar (had to grind some of the mount down to make it work on the axle side)

Getting ready to add my Q-Tec QRC bumper with winch and Daystar 3/4" spacer in the front to make the sure the rake doesn't come back. I dont mind re-adjusting the trackbar again, but am I gonna have to look at Front shock relocation brackets to make up the 3/4 of an inch or whateve it turns out to be.
Thanks
Todd

I added 1” spacers after the bumper and winch with the Mopar 2” lift to get level. Didn’t have to relocate the shock because the spacers just put it back to the height it would have been originally.

 

[mtudb24]

I added 1” spacers after the bumper and winch with the Mopar 2” lift to get level. Didn’t have to relocate the shock because the spacers just put it back to the height it would have been originally.

Great looking rig!. Well done

 

[Casreyn]

Great looking rig!. Well done

Thanks. You too!

 

[rmerkushen]

Mopar lift still has factory rake. I was thinking to place 1/2 inch teraflex puck in the front..

 

[Deleted member 35865]

Do the 35's rub at all with the standard front fender? Love the "Old School" look you went for.

 

[mtudb24]

Do the 35's rub at all with the standard front fender? Love the "Old School" look you went for.

Thanks
Not at all. Lots of room. Mine didn't come with those front "shrouds" that extend up from the bumper to the fender flare. I heard 35's will rub on those if you don't trim them off.

 

[TexasTJ]

Mopar lift still has factory rake. I was thinking to place 1/2 inch teraflex puck in the front..

I used the Teraflex 1" with my Mopar lift. I have the 1/2" pucks for sale if you're interested in saving a few bucks over the full kit.

 

[rmerkushen]

I used the Teraflex 1" with my Mopar lift. I have the 1/2" pucks for sale if you're interested in saving a few bucks over the full kit.

Thanks I already have mine. Do you have adjustable control arms in the front? Mopar lift LCA is all that's needed? Curious if I am going to have any issues with 1/2 puck in the front

 

[TexasTJ]

Thanks I already have mine. Do you have adjustable control arms in the front? Mopar lift LCA is all that's needed? Curious if I am going to have any issues with 1/2 puck in the front

Just the Mopar extended LCAs. You won't have any issues with the .5". I used the Mopar bumpstops, not the Teraflex.

Sponsored