Search results

Yes! I reworked the mounting holes so that all 4 of the ARB compressors will fit now. I have both medium and large in stock. Let me know if you have any questions or need help.

On my 2020 JT I had the sloppy steering as many did. Even after installing the sector shaft brace and a few other components it was still a bit sloppy. I only had about 15k miles. I swapped the DynaTrac joints in and it made a huge difference! It took two days of driving to get used to the new...

The new twin is actually a little smaller overall. It is a bit wider, but approx 1/2" less tall. The new compressor requires a few new mounting holes in the mounts so most companies are scrambling to get their mounts updated.

All of the twin mounts I offer will work. I have several of the updated mounts in production and should start getting those this week. I have at least 5 mounts for the twin that work on the Gladiator. Let me know if I can help!

That timeline sounds about right. I did just see OK4WD and a few other dealers posting on IG that they had received a lot of campers on several trucks

Understandable. I emailed RotopaX to ask if the containers for sure if they are food grade and safe for drinking. It says "Manufactured with BPA free materials" which is normally safe for drinking, but not 100% sure. The container or website does not say if it is food grade.

I'll keep looking to see if I can find anything that might be able to work.

Hey, No sorry, they do not vent. I have not yet found a venting one that will work well for this setup. I know RotopaX has their spigot now but it does not say anything about being vented. I have a fuel tank vent in the container also which makes it pour great. There are several online that are...

Sorry if the photos were confusing. The stainless cap is installed in some of the photos. The spigot has male threads so that a hose can be attached. You can see the cap is not installed in this photo

Version 2 of our Starlink Mini Crossbar Flush Mount. The top section of the mount is CNC milled from 1/4" white HDPE for sun and UV reflection. The solid top provides protection for your Starlink Mini from hail and weather. The mounting brackets and security tab are made from 1/8" powder coated...

Several people noticed the spigot I added to my RotopaX Water Container. They asked if I made a kit, so I decided to put some together for those that are interested. The kit comes with stainless steel spigot, stainless steel cap, Delrin spacer and gasket grade cork gasket. It is not a unique...

Several people noticed the spigot I added to my RotopaX Water Container. They asked if I made a kit, so I decided to put some together for those that are interested. The kit comes with stainless steel spigot, stainless steel cap, Delrin spacer and gasket grade cork gasket. It is not a unique...

I have a prototype 10Gal aluminum tank and still plan to have some made. It is the same thickness as the 8Gal plastic tank. The plastic tank is 60", the aluminum tank it approx 56". I realized with the plastic tank that you need some space for fittings if you want to re-install the side panels...

Awesome, I'm glad you like it!

I think you are right! The black looks cool, but function over form would be best in this case

It is possible. With this prototype, I am weighing the heat and being fully covered, it will take away the snow melt feature most likely. I may rethink producing this version after some more research. I think the heat/sun could be an issue with many of the roof mount setups. "Starlink dishes...

Very doubtful it will work. Tiny Rig Co has a new video of a Tundra build with a 37" mounted on the rear door. It barely fits on the full-size door. Skip to around 18:00

My new Starlink Mini Flush Crossbar Mount. What do you guys think? It still has the foldable foot on the bottom so it can come off the rack easy and set up somewhere else if needed.

If it helps, I just dropped prices on all bed-mounted MOLLE panels approx 15%. I have been working with production and was able to get pricing down for producing these. Being a small company and prices going up on everything, it is not easy and but I want to make them as affordable as I can...

Thanks! We are a small company, so not as cheap as some of the others. But, we make them in 1/8" 5052 aluminum with a texture black powder coat. No drilling, they line up with the existing holes and bolt in without using secondary brackets. The panels are formed to fit the bed. I designed them...