Sponsored

Search results

  1. DIY Mopar LED Headlight Halo Harness

    They just use generic Molex connectors like everyone else, which makes them pretty easy to source as long as you have the Molex PN# - It looks like they use a sub model of the MX-150 for the headlights (2x3). Which makes sense because the tails use an MX-150 also (2x6) Mfr. Part #: 33472-0606 -...

  2. DIY Mopar LED Headlight Halo Harness

    Looks like you can get the plug repair kit direct from Mopar: https://store.mopar.com/oem-parts/mopar-wiring-68225123aa There's no disclaimers about it being out of stock there...Not sure how true that is! Hope this info helps nonetheless.

  3. Halogen NOT LED upgrade (bulbs)

    Careful with higher output halogen (HOD) bulbs. We produced these a long time ago, as an alternative to HID kits for people who wanted a different CCT but didn't want to deal with the hassle of using ballasts/relays. This was long before LED chips were small and efficient enough to start using...

  4. Flush Mount Tail Lights

    There would certainly be small variances in the body panels - We've seen it already with the LH reflector opening on the JL Rubi Steel Rear Bumper. However, this is millimeters at most. As with most if not all manufacturing, there's always a given tolerance which would determine whether or not a...

  5. Flush Mount LED Tail Lights for Jeep JT | Group Buy Pre-Order

    Use this setting in the Tazer - You will have no issues - No resistor for this

  6. Flush Mount Tail Lights

    Haven't had a report for blind spot errors yet. PM'ed you.

  7. Flush Mount Tail Lights

    I can see from the pictures here that if you loosen each bolt, push & hold in, then re-tighten, you can make these gaps go away. Looks like they need to be pushed upward & inward slightly to fit the body contour.

  8. Flush Mount LED Tail Lights for Jeep JT | Group Buy Pre-Order

    PM'ing you to do some troubleshooting

  9. Stock halogen upgrade recommendations - Looking for cheap alternative with Mopar LED Look

    ?‍♂️? https://www.oraclelights.com/collections/jeep-gladiator-jt-led-replacement-lights/products/oculus-bi-led?variant=32544857161825

  10. Flush Mount Tail Lights

    As long as it's not Squid Games & noone get's hurt, we got you covered if you have any issues. PM me directly if you do. :like:

  11. Flush Mount Tail Lights

    We're referring to the OEM LED tails, not halogen. The Oracle tails draw less than the OEM halogen, but more than the OEM LED. I have a working solution for halogen which we are working with our factory to refine a bit. We are also looking into a solution for OEM LED users. Bare with us and...

  12. Flush Mount Tail Lights

    Would recommend the aux switch route for this honestly.

  13. Flush Mount Tail Lights

    Try setting back to active and doing a couple sleep cycles - See if that resolves the problem. If that doesn't help, I would recommend reaching out to the JSCAN support: www.facebook.com/obdjscan

  14. Flush Mount Tail Lights

    Did you have LED or halogen originally? Did you set "Current Value Read From ECU" to Inactive and click the green GO button for each?

  15. Flush Mount Tail Lights

    No sir.

  16. Flush Mount Tail Lights

  17. Flush Mount Tail Lights

    Sorry to hear that. Hope you have a great day!

  18. Flush Mount Tail Lights

    The photos I posted earlier are from an off the shelf set that we are taking to SEMA. I have two of these sets which yielded the exact same fitment on our 21 Rubi. I already have plans to fit these up to any other JT's that may come by just to check, but understand we have to rely on other...

  19. Flush Mount Tail Lights

    See my post below from a couple pages back

  20. Flush Mount Tail Lights

    This hasn't been reported yet. PM me a short video along with more info on your Jeep (Trim, options, aftermarket parts installed, ETC.) Also let me know how you have the reverse lights wired in I made a post a couple pages back about working with another halogen tail member on testing a...




Top