Search results

I'm looking at 2 different ones, the CSF, #8344 34% Larger Core Volume and 68% more Fluid Volume and the Mishimoto, MMTC-JL-18SL 93% increase in external tube area and 32% overall fin area . The info they provide doesn't allow comparison so who knows witch one will provide the most cooling...

Offset from center, I think the rear is 4" to the passenger. Front 9.5" towards driver? Need to compare to some 1 tons.

Lots of street driving as its my DD but its build to go off-road. I will go with Trail Grapplers as they are not to bad but would like quieter tire if possible.

Also actually play in the rocks. JT's heavy 7500lbs + majority is on the back axle. I can move into gears, 4.56 and trussing both axles for about $4100 plus I'll install RCV's that that I've had a couple of years sitting in the box. If I go this route I'll go to 40's either MT's or another set...

Removed in '24 paint perfect $350

Seems the Alt has given up, voltage driving will drop to 12.2 to 12.5 then jump to 13+ but usually 12.5 or less. Normally was 13.7to 14v. Drove home yesterday 50 miles, check charging system came up once I got home. Checked battery and it was 12.3v. I have a Odyssey battery and the auxiliary was...

Removed about a perfect condition as can get no damage. asking $400

Adding 2ea Morimoto 2Banger lights would like to tie them into the LED stock backup lights, will it handle the extra amp draw? Should be total 2 amps additional. Any issue with Can buss with the extra load? Thanks

Anyone have a idea what the std Labor Day discount is from Hess?

I have made a 53'x25" Al plate to mount my GMRS and wm/70cm antennas. I'd like to keep it under 27" high and do not want a ghost. Recommendations?

It looks to be the one I want but as all things are expensive so anyone have one that would share their experience with it? Also any forum discount code?

I bought a mount for the GMRS that is a no drill console mount on the passanger side now I need one for the drivers side hopefully one that sets the Kenwood TM-V71 close to the drivers seat when its fully pushed back, haveing no luck finding one. Not looking for a CMM mount. Thanks

Just bought one..

Seats and belts perfect stored since I bought the JT $600 Tailgate perfect $350 Plastic free Clayton Sprongs used couple of weeks 3.5" diesel fronts $200 Front Teraflex drop shock and ? brackets $50 Co2 tank HD mount and gauge/hose etc $350

Clayton 3.5" Diesel front lift springs.tested for a month on the street lifted more than I wanted $175 pair Rubicon Fox shocks JT all 4 $200 Teraflex shock extension brachets JT all 4 $75 JT rear Rubicon sway bar and links $85 Front sway bar links $20 All 8 Rubicon JT link arms $100 Rubicon...

So searched didn't see that anyone posted about this. 68436631AA is our fuel filter but Baldwin PF46152 is a direct replacement as is Fleetguard FS20378. I assume no one has used one..truck guys are.. I won't use Docs so no use suguesting them.

I have 2 Rotopax flat mount kits never used. $50ea 1 Fuelpax flat base kit never used $35 Pickup or ship on your dime, buy all 3 ship free.

Both charging cables. SS has some scratches from use. To large to fit in the back seat area. $1250 Pickup Locally.

AluCab front canvas storage panel bags. $ 275 shipped installed but as new not used, will need velcro. SHIPPING 48 STATES.. or pickup locally.

Black Friday sale are on so looking at a Propane fire to keep warm and possible do some cooking on it for winter camping. Been looking at a Ignik fire box which seems like a nice unit that a pan could be sat on or pot. Would likely use a fold up Alumnum reflector sheild TBD to get more heat...