Search results

The tow hooks on the front and rear do mount to the frame/rails directly. Our plastic bumpers have openings in just-the-right-places so they bolt on and hooks extend through the plastic. You may be able to find a few disassembly photos of bumper replacements on here with the mount points...

Sweet baby jesus…..

The joose is loose!

Taken with a Kodak film camera:

Hi again Benny, Searching for the LED front marker/blinker lights (the horizontal skinny ones, not the corners). I found this image on the AMP website that's says it's part labeled '3', lol. Thought I might just ask for the left and right part numbers here. As always, thanks for your help!

I've got 33's on my factory 20's and the 3.73 feels just fine- very nearly stock and I get to 8th all the time. The problem is the 20" rim wants moar rubber around it. So the itch to go 35" will get you, and then your talking a gear swap. Just my opinion.

Can confirm this. I looked into wiring the side repeaters on the first year High Altitude (that model came with blanks in place for the light) and you'll need to buy the harness from the mirror (not the whole door) and wire it back to the BCM. You can activate the pins on the BCM with JSCAN...

Found it: 04318060AD https://www.quadratec.com/products/52250_0001.htm

Does anyone have a part number for the friction modifier fluid handy?

At first glance this rack appears to actually be perfect: Appears to be wide enough to have a bed cover, keep installed and still roll up the bed cover, sturdy enough to carry all out sh!t. Did you build or buy? Looks excellent.

I had them color match the slots on mine. Cost a bit extra but this is what I thought Jeep would do if there were a 2024 High Altitude trim (also had to specify the gloss black around the headlights but that wasn't extra). *I also notice a very very slight decrease in running temps (3.6L) but...

Distinction Applied is the company/website. I was skeptical at first, they're kinda pricey, but the guy I worked with was really great. Sent pictures after it was painted and made a last minute change for me, before they shipped it. Also purchased a color matched cowl panel from them, both...

Day at the park after the '24 grille swap:

I would get a case started with Chrysler ASAP, that process takes a long time in my own experience. They may be able to help motivate your local service shop along. Also would try to get them to warranty the repair/replacement of the axle and all the related parts that are damaged. Be aware...

This is a great looking JT- especially like the interior mods you've installed.

I have the dual tip tread on mine- and I rather like the tone. For a v6 it's pretty okay in my opinion. I picked this kit because I really do not like the strained high pitch of other kits when the engine is getting rung out- and I absolutely would not have any gargling or whatever that sound...

Really smart setup, nice work