Search results

Ebrake on. Foot on brake in drive. Normal movement or excessive?

Anybody aware of the hose size for this? Pcv valve to crank case

Where are the camshaft position sensors located? I believe one is under the manifold and one is on top. But where is the one on top located?

Doing an oil change today and not my first time I had a brain fart and poured about 3 quarts of oil in the filter housing, realizing what an idiot I am my whole body became warm with anxiety and I was light headed. I poured the rest of the oil in the oil fill. Waited a bit, checked pressure...

Will these tires fit on a sport without max tow and stock wheels, I have a lift just don’t know if there is rub lock to lock 315/70/17

Is anybody attending this event in Hebron Ct on Sunday 5/21/23?

Will the 10.5 Kenda fit on a stock 7.5 wheel and have no rubbing lock to lock? Anyone with photos possibly. Thanks

Hoping someone could clue me in. For a 4.5 lift do I need both front and rear drive shafts?

When I start the Jeep even after parked for a couple hours rpm starts at 1000 and stays there for a minute or two, then drops to 500. I had the z60 update performed. Prior to that the rpm’s would start around 1000 but definitely not stay as long and just drop to 500 ish. Just seeing if upon...

Looking to possibly purchase this kit. Does anybody have any input on them? Also would I need a different drive shaft or any components

I hooked up JScan and got multiple misfires on all cylinders except cylinder 6. 1 and 3 had the most but 6 had zero. Is this normal?

Does any body know how many and locations on the 3.6. Thanks

If you give your gladiator gas in park does the Jeep shift more then your average vehicle or could I need motor mounts? Felt like the whole Jeep tilted. Strange question I know but i did it today and I felt like it was a little unusual.

Is this Evap purge valve supposed to have a constant ticking and be able to feel it ticking. I thought it’s purpose was just to click open and closed.

Can putting larger tires on a sport s with no lift Cause any driveline vibration?

can aftermarket led lights with built in resistors effect any of the electrical or pcm in any way?

I’ve posted this before but just trying to see if there is anyone with the same issue or has had it resolved. I have a vibration at idle that’s not horrible but I can feel it in the floor and seat. My coffee even moves in the cup holder. I’ve had all pcm updates and no check engine lights...

Does anybody know if the harmonic balancer just has the one bolt and what size? I’m going to see if it needs to be torqued thanks ?

Does anybody else hear what’s like a metal grind type sound when they turn off the engine?

I had 0 offset wheels with 285/70/17 tires. I put the tires back on the stock wheels. I don’t know much about this so please don’t attack me lol ? but would the new wheels and tires need a different alignment?