Search results

I appreciate the reply and wish you well.

What wire did you tap to get power on unlock from the key? I found one in the A pillar that energizes when remote unlock but it also energizes when touching the unlock button on the handle even without the key in my hand.

FYI the amppro ap4-ch41 says it does 4v pre-out and it does NOT. I'm reading 1.5 at full volume 40hz signal. At normal volume is less than .1v Found a few other forums talking about this and seems normal for this. Talking with PAC support to see what the problem is.

No not if you use one of the recommended subs. I'm trying to fit a 5.9" mounting depth sub in it and want to give it some extra clearance. The fox 2" is for their dual 10 box but I can't lose 2" of rear headroom. My boys are 6'2" / 6'3"

I have a fox box single 10 that I'm thinking is putting a sub that will need a 3/4" spacer. I know that Fox acoustics has a 2" seat lift for the back seat. I only need to lift the seat 1/2" - 1" to get some clearance for the sub. Has anyone lifted the rear seat a little? Does the seat latch...

I want to do this but I want to also have a camera when tailgate is down. Decisions decisions...

I bought my wife Amp Research steps for her Tahoe. "She got" me, interior ambient LEDs and the wolfbox tripro 900. 😉

Wolfbox mount came back in stock on Amazon. Ordered one. I also might dash mount it. I'm 6'2" w/ long torso so getting the mirror out of the way might be nice.

Are the JT mounts discontinued? I have a Sport S (no adaptive cruise). Don't really want to mount it to the windshield.

Message them here - they extended the warranty on the pre-order units. I also was a pre-order customer. Their warranty is handled via AI, so PMing oracle here will get you a real person. They took care of me. Good luck 👍

My son got me back in. We just did a full setup in his (my old) 2007 jku. It REALLY made me want a system again. Gonna do a little writeup on the PAC AmpPRO AP4-CH41 in a Gladiator. I figured out how to set the eq in the unit (via PC connection) and make the bass eq in the head unit more like...

Stage 1 complete. Full replacement audio with stock 7" head unit. I used the PAC AmpPRO AP4-CH41 since I wanted to upgrade the speaker wiring (16 gauge ofc) too. Ran RCAs from the PAC to the amps. Used a kicker 360.4 and an 800.1. Ran zero gauge wire - tight fit under the door sills! Upgraded...

This was actually last week but forgot to post over here :) Gave the stock Alpine audio the boot. I tried but got tired of hitting vol 38 and wishing it went to 45... Tried to keep it around $1300 which was the cost of the Alpine upgrade. CompR 10" running at 2ohm, 600w from amp. Bass...

Time to correct my mistake with ordering the Alpine system. I lost most under-seat storage but gained a TON in sound quality and bass. I've always liked Kicker and the price was great during july 4th sales. Went with a Comp R 10" 4 ohm wired at 2ohm. The amp puts out 600w at 2ohm. I have room...

Oracle reached out to me and made it right. Hopefully i won't need to deal with this part again...

My turn - first set went out just over a year (each about 6 months apart) - it was the initial batch and they had extended the warranty due to production defects. Now at 27 months, one is the replacements went out and their AI bot said there was nothing they could do but offer a single light at...

I am having to replace the a second set and your chat bot doesn't want to help me other than offering a single over priced replacement. Sad that you still make the best looking light but it's time to explore other options

The tail lights won't last more than 2 years and they use a AI to address the problem. I have been through 2 sets since the released these. Time to find a different option.

I only want to keep the driver side storage. I can give up the passenger side. Just need enough room for my recovery bag

I think I'm My son is pushing 1200w through two 10s in a ported box... I want to be closer to something like that - thanks though. Fox box single 10 looks like i can build some little sections on the ends and keep some storage by removing the bolt box