Just an observation but the T/C light coming on isn’t an indication that your truck is struggling, that is it using the tech it has to keep things from getting worse.
-More weight in the bed (like 300 lbs min.)
RWD in the snow fishtails, especially in a truck, just nature of the beast.
Should be able to take the title and the lien release letter into the county clerks’ office and they’ll stamp the title as clean/clear over the lien holder’s info. The release letter should have your vin or some other identifier tying it to the title.
This should actually be in the manual, I do believe there is an oil with a friction additive for the trucks with a limited slip rear (like you’re describing).
At least every other vehicle I’ve driven with an LSD has required that 🤷‍♂️
Yep. Remove cover, clean off any surfaces. I don't know if the factory uses gaskets or not, if they do, and they're the reusable kind then great! If not, then make sure you scrape off all the old gasket. Put a bead of RTV/silicone all around the cover (or on the pumpkin, whichever your...
I remember that you used to be able to add painted fenders to any package that didn't already have them if you were doing an order, I think they took that option away at some point.
My understanding:
1) All fenders bolt into the same location.
2) Rubicon/Mojave (both painted and non) are higher, allowing for 35's w/out a lift.
3) Painted non-rubi fenders are two-piece fenders.
4) non-painted, non-rubi fenders are a single piece, plastic
5) Max-tow, Rubi, Mojave, and...
Crate secured in the bed, I’ve done this for big and small dogs alike. If rain is a concern then you gotta basically make a rain fly but otherwise it’s straightforward.
Recommend some kind of plywood ramp or something for them to walk on so you avoid a possible injury if they hop down and...
Well I’m still on 18.1 so this gives me pause. Have you tried plugging anything else into the usbs to see if they charge?
I’ve heard of car play not working but to disable the ports would be a whole new level of bug 🤔
I was able to just use a small/thin flathead screwdriver to clear it out, in combination with slowly working the screw in/out. I think I used a touch of WD-40 on one but they cleaned up fairly easily.