Search results

Filmed a short video of the cover, it only fits on one way. As far as I can tell, 90% of these “teeth” have nothing to bite into, and only two small plastic prongs loosely clamp onto a plastic tab on the bottom. But as you can see it still is incredibly wobbly, in the video I’m barely putting...

I was installed the AEV 2.5 lift kit on my Gladiator yesterday, and when removing the passenger rear spring it hit a plastic cover which popped out of place and fell on the ground. Heres the problem, I cant get the bloody thing back on. Im 90% sure where it goes, but I cant get it to snap back...

Just FYI they are made in China. Not saying its a bad product, just letting you know.

Are you trying to fit a spare larger than 37"? If not I would recommend just putting in the stock location.

How is your ARE shell in cross winds? Worse than stock or not too noticeable?

Second the ThinkWare Dash Cams. I have this setup https://thinkwarestore.com/product/q200-front-rear-dash-cam-bundle-us/?srsltid=AfmBOoqr8dQVsFEiBNiMIl8X7aY8PmYj3Vl2LHzbZUEPyOal7-cvPKZt should also be sold on Amazon. It also has a sentry mode and records anything that goes by the Jeep front or...

According to the Google overlord, "some 2020 models built on or after August 14, 2020 got the steel box, and all 2021 models."

Just a heads up, you linked the version for the aluminum steering box. Im 99% sure with your JT being a 2021 you have the steel box. I installed this one.

Yup, definitely a driveway job. If I'm not mistaken the Synergy and Steer Smarts install pretty much the same exact way

It took me about 3 hours, taking my time (and I forgot to pick up red loctite beforehand). The thing that took the most time was lining up some of the bolts. I chose it over the Synergy because its 1/4 steel rather than 3/16. And I heard the synergy brace had some sort of issue with the bearing.

Method Bead Grips 705

Aren't all new 2025 Gladiators being made with the updated TSB parts that is supposed to remedy to tick?

I installed the Steer Smarts Sector Shaft Brace w/ Track Bar Reinforcement I got at Northridge the other day and finally had the chance to take it out on the highway and just...wow. I am extremely impressed just how much of a difference it made. There is no more dead zone in the steering, it...

Can't wait to see how these Jeeps are built up!

Mine only does it at one gas station, I don't go there anymore and haven't had any issues.

BFG ko2 in 37x12.5R17 Load range C

My 37's weigh the same as the stock 33" Falken AT's, I really havent noticed a change in power or MPG. I still get 16-20mpg depending on how and where I'm driving. No plans to regear.

Northridge4x4 is my go to, If I can't find it there I just go direct to manufacturer. Sometimes NR44 can order parts for you even if they aren't listed on the site, its worth contacting them!

Depending on much heavier the new 35's are compared to your current 33's. Probably not at all noticeable.

No way in hell i'd attempt a full vehicle wrap. But I figured even if I messed it up it was "only" like 150 bucks. It turned out pretty good, there is still like 5 pesky air bubbles that wont come out, but I can live with it.