Truck needs to have come with the LED package from the factory. No disassembly necessary, can see the connector for the DRL harness inside the wheel well. Driver side is easily visible....passenger not so much but doesnt matter. Have to lay on your back underneath and peak up the wheel....this...
XY401 on the lighting sense wires...is that some sort of inline disconnect?
Has anyone ever ran this wire? What terminals would I need from the body side DRL/Turns connector to XY401 to BCM C6/F?
I've got an easy path to run this wire but don't understand how to pin it.
Truck has been outside sitting for 6 days in San Diego during a rainstorm. Got in, saw a wet spot, and....found this odd....
Video:
No drips anywhere topside. Truck is so dusty I'd see them even after they dried. Nothing on dash, seats, anywhere else. Once the door was opened it went away...
There seems to be something I'm missing....I've told the BCM about the LED front turn and park/marker lamps. Also set DRL location to dedicated and drl config as Optional.
The upper strip turns on with headlights. Turn signal works. They do NOT turn on with headlights off. Anyone know the...
I want the REAR MOPAR tube doors. Not the fronts. Problem is, you can buy either the fronts or all four, not just the rears. Would anyone be interested in buying the fronts and splitting the shipping with me for the whole set? You keep fronts, I keep rears.
San Diego
FFS....
Had some creaking. I'm aware of the 155inch/lbs +/- 22..... but holy shit no WAY I'm gonna turn those bolts to 155.
I used my FIREARM torque driver....goes to 65 inch/lbs.... 65 seemed like it was about to crack the top. I hit that click then used the Jeep wrench to turn another 1/8th...
Passenger side rear LCA....frame side. Curious if my gas tank skid is closer to my LCA mount than most people. Rock Hard LCA skid does NOT mount. Fought with it for 2 hrs today. Even the bolt is too long....would need 5 washers to avoid contact with the skid. Sigh. The red circle is the...
Am I doing this right?
Purpose: kinetic recovery and towing using the factory front tow hooks on my 2021 Mojave.
The setup would be:
Tree saver attached to front tow hooks using 2 10"soft shackles, using the tie straps to hold them there so they don't slip off if slack.
20" soft shackle...
Tell me how much you love your OEM Sunrider made by Bestop.
I had gotten used to carrying my freedom panel bag....taking them off putting in bag, then bungie cording the bag in the bed. ( 3 kids in rear ).
Also can't imagine just thinking...hey let's take the front top off at this stoplight...
Let me know. Will pay 500$. Any more than that I'd just order new. Must be OEM which I know is Bestop premium twill. No Bestop branded. Just a preference.
Right side of truck, above the passenger sill trim and to the right of the big firewall grommet the harness passes through. Just a shitload of plastic like poly sheeting you use to cover things when painting etc. It's in there good, like wrapped all around the connectors up in there. Will get a...
Selling an almost new CVPM used for installing the OEM front trailcam in ONLY 2020 Gladiators. 350ish online. Selling for 250 shipped anywhere in the Continental US. It has been used for about 1 hour.
I am selling it because I have a 2021 and learned the hard way that 2021/2022 Gladiators use...
Selling an almost new CVPM used for installing the OEM front trailcam in ONLY 2020 Gladiators. 350ish online. Selling for 250 shipped anywhere in the Continental US. It has been used for about 1 hour.
I am selling it because I have a 2021 and learned the hard way that 2021/2022 Gladiators use...