Search results

I think you will love them. Just make sure they are ported in a properly sized box. Otherwise they will not be loud enough, in my opinion.

Power to the push button map lights/dome light.

Here you go.

$ 10 Quick disconnects. 8 stainless washers 2 7/16 hitch and clevis pins Heat shrink the pin for quiet operation. Ran these on my TJ for years. Worked great.

Made a sticker for orange justice, my Jeeps name.

Thanks man, VENT stickers, such a little thing that makes a big difference.

I bought a 8mm rubber nut and small screw for the back cover that seems to be difficult to remove during hard top removal.

Thanks man, my wife can made darn near anything on her vinyl cutter? plotter? printer? Whatever that thing is.

Got these in the mail in the last few days. 300 miles on the clock and I'm swapping gears already. 5 quarts of synthetic with friction modifier, to round out the change.

The port length of 8 inches is going to only net you a tuned frq of 47hz and a lot of port noise at that size. If you cut it down it will only be higher. I believe a slot port will be much better along the wall of the enclosure at these box dimensions. I have modeled subs for years and designed...

Perfect over priced. Everything here is expensive and I paid 5k over sticker. :Eek

If you are cutting a round port for tuning, what is the turning freq?

I chose the Tazer Lite model due to its price obviously. The only thing I wanted more was the seat belt chime and the halo led light controller. Both of which require the Tazer Mini, which has all the features but to me makes it menu heavy and more than I will ever need. I bought mine from...

Installed by JL JT Tazer Lite. My favorite modification to date.

No; however, you can unzip the front and unsnap the sides in seconds and it comes right off after the initial install. I can take the top off in 10 minutes with my hoist and throw this on in a minute. I am on my way.

She was my PTSD deployment vehicle. Spent 100s of hours on her. This thing saved my life. Not kidding. https://thefactoryfiveforum.com/showthread.php?22645-9196-475hp-347-MK4-Roadster-Build-(Insurance-and-Plates)&highlight=texasaviator

Installe the Mopar Sunbonnet Mesh today. Once the buttons are all installed and the front clip is installed. It only takes seconds the second time around to install it. Just zip the front, snap the sides and its on. Love this thing.

The sunbonnet Vinyl or Mesh top is easy to install. You will need assorted torx bits or drivers. I used a hammer drill and it made light work of the bolts in the windshield. The others are the smaller torx for the roll bar and the snaps that will go in their place. The kit from the dealer...

Made another sticker.