Search results

Milestar Patagonia XT’s (hybrid all season tire is where I would put this tire- and photo for tread view. ) great tread wear, super quiet on road, great off road (for what they are), they are Light weight, and reasonably durable….. and they are cheap??? These are three peak rated so pass...

I definitely have a “leaker”. Timing chain cover has leaked twice, valve cover leak, cam position sensor leak, the charge pipe leaks oil….. (passenger side top connection)…. It’s a load of fun.

Level surface, drive as close to a wall as you can- mark the top of the light cut off line with 2” painters tape. Back up 25’ and the top edge of the cut off line should now be at the Bottom of the painters tape. I did the same with my fog lights but 1” and ~10’

This is backwards :) Diesel received the German ZF manufactured unit… gas received the American Clone. 🍺👍🏼 These transmissions are stout. Several x5’s and sq5’s making 700+ hp holding strong. “Lifetime fluid” is in direct relation to the manufacturers expectations to the powertrain life...

Has anyone installed an aluminum cold case radiator yet? Or mishimoto?

I see that PPE is a site sponsor- do they offer a discount code?

Curious if folks swapping their clutch kits are also modifying the clutch hydraulic pressure while doing this? clutch delay valve Clutch restrictor ^^ not really sure what the technical name is for it…. But it totally transforms things in the challengers…. Would think the same effect would be...

Yes, and most will post something about the tazer process was installed improperly…. 🙄 mine has done it through several updates- marrying in marrying…. Just an annoyance I have learned to deal with…. Some days it does drive me nuts though.

Well, suppose this is one of those different strokes for different folks deals. Way overpriced from what I’m seeing. Also totally down to see the longevity of this roll back topper roof…. Unless there is some seriously trick magic support somewhere :|. RTT is about 5 years behind. Just looking...

🤷‍♂️ wheels, XR’s look nice Tires- have you considered Patagonia XT’s? Save some cash and maybe a couple lbs. wear has been great, durability, noise and performance is way better than I expected an all terrain…. In terms of size….. your splitting hairs. Whatever is cheaper, later you will...

Thank you for buying actual “Made in USA” :)

My $0.02 Start with removing any factory bump pads- the yellow bumpers on the frame side. flat- pull the springs and set the jeep down to get the minimum bump needed for that unforeseen bump. (My diesel with XT 37’s flat clear with bump) Once flat bump is known- move to the ramp- again...

They really aren’t… there are a couple YouTube videos for how to remove the door cards. To be honest the biggest pain was getting the panel behind the back seats off. Doors took maybe 20min a piece? Several videos on YouTube help with the “unknown”

EDS Differential Solutions in Abbotsford BC- look them up, might be worth the run across the boarder…. $2k Canadian bank on that exchange rate discount!

If they are charging you 12 hours of labor- RUN…. A ligit gear shop should have you in and out in a couple hours. Wrong side of the country but- Premier West Gears in Riverside Re-regeared my JKU in an hour and a half…. And I slowed them down BSing and asking questions. With Motive gears and...

https://www.allmoparparts.com/sku/68639390aa.html Thanks for this- they do have them. I checked a few of the other “mopar parts” sites and turned up nothing. Above link will save you about $90. Vs buying a complete kit ;) :)

Anyone have a good link for buying replacement blades? My second set from the initial purchase is starting to go….

The doors were a significant difference. The floors- not as significant as the doors. 🤷‍♂️ it’s been awhile- but other Jeep owners when they have gone for a ride say that mine is way quieter than theirs 🤷‍♂️. For me- when we take road trips for several hours on the highway, our hearing no...

I was just trying to put the info on the table for others that may not be informed for their use- do’s and dont’s… $20 extinguisher $80 stick…. People tend to grab what’s handy if they have not trained/educated them selves… Huge fan of the element sticks. They are handy, easy to use, great...

I challenge you to watch videos using the element sticks in windy conditions or depending on what is burning They are a GREAT tool… but have certain limitations that render them useless, so having a traditional extinguisher is very important…. The biggest you can fit and deal with on the...