Search results

It was a no-name.

I purchased 147 foot of 12mm/half inch synthetic from Amazon for my rebuild about six years ago.

A little update Jeremy, now that the build-out is about 80% done. I will be switching to the 3" heavy springs from AEV. Starting to feel a little bounce in the rear.

hey Jeremy, sorry this is getting a little mixed up. I installed Battle Born internally heated batteries, 2 currently. In my Alu-cab. I recommended the heat pad for the lithium batteries that are not internally heated. Apologies for the confusion.

I have the previously mentioned heat pad on my 16gal water tank.

Easy now. I have Battle Born internally heated batteries. It was an option. Turtle Expedition used them on engine & house batteries, water & fuel tanks as they drove through Siberia back in the 90's. Just trying to suggest options. Safe travels

You can purchase a RV tank heater & have it under the batteries. I believe the smallest self regulating is 12" x 18" - on @ 45 off @ 65 degrees. Falcon brand on Amazon.

Well traded the 2012 Prius in on a 2022 Willys. Now the Rubicon has a little brother.

Looks good!

ICON suspension makes a 1 3/8" aluminum spacer for the rear. Metal Cloak makes duro-spring bump stops that will reduce the harshness of bottoming out. My 2 sense. Good luck.

Red line - 4" Yellow line - 78 1/2" Blue line - 12 1/2" (does not include the stand-off height in the picture that mounts the load bar)

Recommend this camera relocation mount from Mule Expedition. I added a 1/4" of spacer to it. Plan to add another 1/8" to it later.

Here's a picture from a few months ago. The side door is open. Just let me know if you need specific pictures. Also, your going to love it. Alu-cab is a total game changer.

The Alu-cab brackets are 2" spaced holes. I made an adapter to mount a Rhino Rack 270 Batwing awning that mounts with 4" spaced holes. I can post a couple of pics. The area you marked in red is the wire chase area. You will need to seal all penetration.

yes

Currently with Metal Cloak sides

Past pic

I mounted a M8274 with a custom mount. I'll post a couple pics tomorrow.

We are running the AEV 2.5", it was a night & day difference from stock Rubicon suspension. Live close to you, sent a DM/PM.

I plan to do the same thing. Bob has done the cut down JCR, jt_rdb on Instagram. Also, one of the Goose gear employees has done the same to his JT. Please post pics if you take on the project. Safe travels