Search results

I have a 23 JT Rubicon and no wiring change was needed. Swapped out the Halogen for Mopar LEDs, used the Tazer and set the lights to LED and turned on the Halo. Works fine. Some 2021-2023 vehicles may require a revised short jumper harness, Part Number 68414409AB. I bought it along with my...

Anyone in the 757 (Va Beach, Norfolk or Chesapeake) have KATZKIN covers installed by a local authorized installer, that did a great job, fair price and would recommend them?

You still have time. https://www.jeepbeach.com/jb25-giveaway-jeep/

Or for $50 take a chance on this one. :)

Follow the OEM recommendation. Add air in the winter as needed and remove air as needed in the summer.

If you jack up the body on the drivers side, those two upper bolts are easy to reach.

Sent a PM.

They will have 35s and 37s in the KO3, but I don't believe either of them are on the market yet. They do have LT315 /70 R17 which is essentially the 35. But if you want 37s now, then K02 is it for BFG.

What?

The harness is needed for the passenger side only when installing OEM LED Headlights. It's about 8-10" long, it's more of a Jumper. Easy to install, once you remove the headlight, just unplug the power and follow the power harness back to the next connector. Remove the existing jumper harness...

What did Oracle support say? Also sometimes, the TAZER settings are finicky. I would go back and look at the LED headlight setting and go through the sleep and reboot routine to make sure it is still good.

Another Renegade with original 304.

This has worked great over the years. Easy to use. Removes the core but doesn't let it go shooting across the parking lot. So it is fast. https://a.co/d/8G7vw4f

If you go the Tazer route, it does many more things than just the headlights. I changed, not only the headlights, but the tail lights, DRLs and soon the Fogs. Each of those require the change of settings to LEDs. In addition to the lights, I used it to turn off the 3 beeps if you leave the...

I recently went with the blackened lights. Here are the part numbers, including the jumper harness. I have a 23 Rubicon and did not need the jumper harness. I ordered because there is no rhyme or reason as to if you will have it or not. The headlight will work with just the 3 wires but the...

Some of did this, got two sets of the fronts and install the fronts on the rear too. Fronts are wider than the OEM rears. Required a notch to attach to the rear. https://www.jeepgladiatorforum.com/forum/threads/xtreme-recon-fender-extension-instsalled.61424/

I am not sure what you mean by "What did I do?" The MPC website says their Aluminum bumper does not fit a Mojave or Rubicon. I was asking those that actually installed in on their Rubicon was there any issues.

So if I do not plan on installing a winch and leave out the included winch plate, the bumper and their skid plate will bolt right up? The OEM fogs fit ok? I have a Rubicon with the factory "plastic" bumper and OEM skid and would like to change it to the MPc version.

Please confirm OEM Mopar Steel Front Bumper and Steel Skid Plate from a 392 will direct fit the JT Rubicon that currently has the "plastic" bumper.