Search results

Stan any aftermarket skids on your Glady? If oil pan/trans skid was added, check exhaust clearance.

I tow a 24” camper that has a dry weight of 3100poubds and Gross weight of 4100 pounds , plus I have a RSI cap and a ARB fridge in bed and it felt soft. I have air bags on three full size Chevy SUzv over the years but did not want air bags for even going off road. Chris (White Rabbit) here...

I’m making the change from stock Falkens AT3 to the 255/80 Falkens AT3 which weigh 52 lbs. versus 62lb. for factory 285/70 hopefully feel a bit of difference in steering, and possibly mpg. Hell maybe I’ll be able to jump the Mojave higher!😎….Jack

I’d go with the solar panel with charger that clips to batteries. I have one on my beach camper that sits from November until April, and only runs the propane/CO2 sensor but battery is good to go every year. Charging up your power station then hooking it up sounds like it might be a bit much...

I’m putting mine on the bottom edge of my RSI cap ,can get 18 per side and ten on back. 46 will take me awhile looks like I’ll be getting three more this year in NH, MD, and VA. Some out west sound great but that is a lot of driving , I’ll probably focus on the eastern side of the country...

Do you have an automatic or manual transmission?

We’ll see ya in a bit, been noticing your building up your Glady pretty nice, looks great. Enjoy your retirement, some guys have a tough time after a month or two , just ride it out and settle in and above all keep moving when ya stop moving ya start dying!….Jack

Cape Henolopen , Fort Miles is having a defense day , we didn’t know but seeing WW2 planes flying by is cool , but brings up the sad part, people in America did not think the war was at home, but Merchant Marine service paid the price with many tankers sunk coming out of Delaware Bay , there...

Guess there is a place for it , but not at my place. Too basic and low, but the fact that they come unpainted and designed to be wrapped is cool and scary at same time! They even have optional wrap kits….Jack

Welcome, awesome color!

Remember the bed 120v outlet only works when truck is running , so charging while driving is good plugged in at night not so good. Ten gauge wire is good for 30amps you don’t have to run the negative back to the battery as there is a ground point above spare tire or make your own on the frame...

That’s the right Mopar part number and the way I went on my 21 Mojave , putting the lock nut on was an extra measure some did. Metal Cloak should be able to tell you if the 25 is still the same setup. It is not just for towing but for piece of mind and is not an expensive or hard to do mod!….Jack

Getting ready to put on Next Venture belly skid that is coming in a little while , upgraded my older version of 1/4” aluminum with their HD Mod kit putting a 3/16” steel skeleton above the aluminum and putting a 3/8” UHMW board under , the oil pan trans skid is rock solid. Also got the HD...

Perhaps we get this thread back on track , I agree with most here it sort of sucks how mods go, if you need the coin and can swap parts you might do better , then again as a guy said pick a number throw it out there and see what happens. I also think $50K is a bit high but put it up for say...

Eric on the tailgate to each his own but anyone driving a 2021 Gladiator , should take off the Gladiator tacky vinyl and lay on the 80th anniversary emblem. My Mojave has them although it is not an 80th anniversary edition it is the right year and I celebrated 80 years of Jeep……..Jack

Mike, never say never, especially in a Mojave!

Cruise control electronics cover when folding down windshield>

They are not all the same stay away from real cheap ones, I have a couple off brands and an ARB kit, the ARB is a tank ya get what you pay for, But I have not had to use it yet. I have plugged a few tires and when trying to push and turn through the hole is when you will see the difference, but...

Bill I wasn’t talking about selling the Mopar plate ,I was talking about just sending it. Perhaps this weekend we get on the phone and we figure out if the bulldog plate is lower or not, should be easy enough, two old guys sitting on a cold garage floor with poor eyesight ,poor hearing , should...

Bill I like Jteakus idea or take it farther and make a square plate, how high are you talking 3/8”? Or perhaps I send you my spare Mopar winch plate, perhaps it is build “higher”?…..Jack