Search results

I'm going to install the same tire but went with 11.5" with the stock wheel.

Unfortunately, when you remove the torque management is going to be impact on reliability. Especially the diesel with high torque banging through the gears. That’s one of the things about the Derringer I like is that it pulls power between shifts momentarily.

The oil also takes longer to reach operating temperature. Some impact on efficiency unfortunately. I want to do the radiator and trans cooler because those are thermostat controlled.

Thanks for the Tip! I did find the wheels locally. It is the Only 6.0 back spacing wheel that can bead lock but the rings are discontinued. They barely ring and poof now gone. There is another shop making them but plan and not as nice as factory look. By the time I get a used set of wheel and...

My label says 982 pounds for the cargo capacity 2023 Ecodiesel Rubicon a lot of options. I have already bought so much gear lol🫣🫣🫣😮‍💨😮‍💨. I also did remove some weight with the lifep04 starter dual batteries as the bigger one and a few other weight reduction modifications. The gross vehicle...

If you can some specs like this next to the filters, it will help people chose the better ones if you have more test specs saved?

Thanks for the info! Was the pull and the numbers done with the 24' Grill and Mishimoto radiator? How was the trans temp? Mishi makes a trans cooler as well.

Doing deep dive on wheels and wanted an upgrade but the weight holds me back and the backspacing for poke which I don't like. I would like a stock fit 7.5" wheel to keep weight down and still do a beadlock and the Mopar 392 Wheel 22-23 is the only one. I find nice ones for sale locally but the...

The sensor kit document on the first page shows up 2022, does that mean 2023+ don't have the issues with a different sensor? Also, from what I have been reading, it's related to wear metals in the oil that the sensor miss reads? Is this still the case on the 2023+? EDIT: After more research I...

Pretty nice! My outlet is 20amp and the looked over some vids and the US spec works with 20amps from what they say? Ill do a wall mount and get one this Black Friday. Thanks for mentioning it.

I wasn’t referring to the STP I was referring to Redline Oil Euro im running now. I’ve only seen VOA in 2015 of that oil and no UOA. It’s gonna take three samples before I get a trend going so that’s a number of years ahead.

The one from 2015? I wounder if they changed anything since then? The last update on the product data sheets was in 2023. I'll do my 1st UOA next year.

I need to wall mount my CR unit and my wall joyce is 16x16 and the mount is 12x12. Using wood I can do it but wish there was nicer way. Also this Big Boi, I see it is heated but would an air compressor do mostly the same job?

Yes I noticed and suspected that. The 4th one almost looks like the 1st STP one but still a little different. The problem is with known wrong numbers from Blackstone, are they all the same oils lol? Either was, I would not use any of them when you see the numbers from Amsoil MS, Molygen or HPL...

The current sample almost out of spec if that is being reported accurately by Blackstone we don't know. but look at the other older ones. 11.16 & 10.68 cSt. Were those also STP?

Meant to say some of the oil in tte other samples are shearing down pretty bad. Blackstone doesn’t do fuel dilustion. You need to send it to oil analyzers or another that does proper reporting.

Since his Blackstone underwear numbers will be 20% higher. Were you using STP with the other samples? It shear downs pretty badly. You would need to see how bad the fuel dillusion is with another oil analysis company.

Nitto Recon Grappler or K03

I used there templet and won't fit a stock wheel. They fit 17s but it needs to have the backspacing for it.

The rotors show 14x1.25 and I search and Ram 1500 came up 14.9"?