Sponsored
Are there any check engine or warning lights when we eliminate the FAD and put in a 1 piece passenger side axle??
RedBearon
Well-Known Member
If you remove the FAD module, yes.
Some one-piece shafts do not require the removal of the FAD (it just doesn’t do anything after the ring is eliminated) and others do require the removal of the module.
RCV’s do not require the removal of the FAD. Most ujoint style shaft do.
Either way, it’s easy to electronically eliminate with JScan or a Tazer.
Some one-piece shafts do not require the removal of the FAD (it just doesn’t do anything after the ring is eliminated) and others do require the removal of the module.
RCV’s do not require the removal of the FAD. Most ujoint style shaft do.
Either way, it’s easy to electronically eliminate with JScan or a Tazer.
hjdca
Well-Known Member
- Joined
- Oct 27, 2019
- Threads
- 9
- Messages
- 1,733
- Reaction score
- 2,494
- Location
- Southern California Mountains
- Vehicle(s)
- Jeep Gladiator Rubicon manual Sting Gray
- Build Thread
- Link
Note: some guys have reported slight vibration when removing the FAD with a lift kit. The additional parts free-wheeling, but, rotating at an angle is the culprit.
Sponsored
