Sponsored

BDS Lift

Moe_Fugga

Banned
Banned
First Name
Jason
Joined
Jan 1, 2020
Threads
16
Messages
817
Reaction score
1,362
Location
GA
Vehicle(s)
2020 Gladiator
  • Thread starter
  • Banned
  • #1
Anyone installed a BDS 2in leveling kit yet? I'll put a link below.

My shop said this was a good economical kit being that I don't want to go crazy high and am just looking to go with 285/75/17 tires on 17x9 wheels. I know you can do that stock, but the front needs to come up and I am apprehensive (may be ignorant) about spacer only leveling kits. I had a 2013 2dr Wrangler years ago with a full Rubicon Express lift, but don't want to drop so much cash. So a few questions if you don't mind:

1. If you installed this kit how is the ride?
2. Why only replace the front springs and not all four with four new shocks?
3. Are two front spring replacements usually similar to factory spec springs just taller?

Thanks for helping the new guy! :like:

And yes I searched for BDS and came up with nothing haha

http://bds-suspension.com/product?ma=7&mo=75&ty=1&yr=2020&kid=1436H
Sponsored

 
Last edited:

Number1olddog

Well-Known Member
First Name
Jason
Joined
Nov 8, 2019
Threads
15
Messages
49
Reaction score
16
Location
Amarillo
Vehicle(s)
Gladiator, YJ, Renegade
I just installed this exact kit. Lot of bang for your buck. Great CS too. They sent two drivers side sway bar disconnect “holding” brackets. Called them up they sent the passenger side and had it in two days. The ride actually feels better if that is even possible. Takes bumps and potholes a little softer. I didn’t replace the rear shocks as I put on Rubicon shocks already prior to installing the kit. The front coils seemed similar but yes were about 2.25” taller. I highly recommend the kit. The JKS QD sway bar links are nice as well.

Jeep Gladiator BDS Lift 6472AAB1-DF25-4536-BEEB-37594D572412


Jeep Gladiator BDS Lift 7A0DA816-1874-47AD-B7AC-14C1FDD36086


Jeep Gladiator BDS Lift 25428E1C-520D-4935-8ED6-8A32BA265BAA
 
OP
OP
Moe_Fugga

Moe_Fugga

Banned
Banned
First Name
Jason
Joined
Jan 1, 2020
Threads
16
Messages
817
Reaction score
1,362
Location
GA
Vehicle(s)
2020 Gladiator
  • Thread starter
  • Banned
  • #3
I just installed this exact kit. Lot of bang for your buck. Great CS too. They sent two drivers side sway bar disconnect “holding” brackets. Called them up they sent the passenger side and had it in two days. The ride actually feels better if that is even possible. Takes bumps and potholes a little softer. I didn’t replace the rear shocks as I put on Rubicon shocks already prior to installing the kit. The front coils seemed similar but yes were about 2.25” taller. I highly recommend the kit. The JKS QD sway bar links are nice as well.
I like it! What tire size did you go with? Factory 17x7.5 Rubicon wheels?
 
 







Top