Bed Mopar Invertor and 12v

[ZoneArc]

Is there a factory harness that is there and if you select the option they just pop the panel in and connect the plug?
I don’t need to do a crazy mod and drag 10g wire from the battery if the factory harness is there. Anything I would plug in would be mild.
I crawled underneath and there are a couple harnesses there but it's hard to get a good angle to see if a plug is there too.
If there is I might just order the part myself.

Sponsored

 

[Mr._Bill]

There are threads on doing this, check the Uconnect and DIY sections. Some parts are needed, but the truck has to already have the inverter and interior outlet factory installed.

 

[ZoneArc]

There are threads on doing this, check the Uconnect and DIY sections. Some parts are needed, but the truck has to already have the inverter and interior outlet factory installed.

Found it! Thanks.
Here's a direct link to the parts you need *if* you have the plug near the backseat already for anyone that searches for this in the future.

https://www.jeepgladiatorforum.com/...-about-adding-outlet-to-bed.17684/post-746161

Sponsored