Soedog
Well-Known Member
- First Name
- Ralph
- Joined
- Jan 1, 2020
- Threads
- 7
- Messages
- 121
- Reaction score
- 466
- Location
- Northeast Oh
- Vehicle(s)
- 2020 Gladiator Rubicon, 2006 BMW Z4 3. 0si. Previous Jeeps: 2012 JK Sport, 2016 JK Rubicon Hard Rock Edition
- Occupation
- Quality Engineering Tech
- Thread starter
- #1
Got driver and passenger side panels assembled today.Was an overall easy install that would be super easy with an extra set of hands.
Only PIA was getting the serrated nuts lined up with the factory bedside access hole.
Taped them to hold in place but they would move a bit and shift when installing the mating bolt. Also had to squeeze my arm in the tight space between the inner bed and factory bedside steps which was also a slight challenge.
Very impressed with the quality of these panels. Job well done by Built Right!
Only PIA was getting the serrated nuts lined up with the factory bedside access hole.
Taped them to hold in place but they would move a bit and shift when installing the mating bolt. Also had to squeeze my arm in the tight space between the inner bed and factory bedside steps which was also a slight challenge.
Very impressed with the quality of these panels. Job well done by Built Right!
Sponsored