Sponsored

Dumb question probably

Phil3333

Well-Known Member
First Name
Phillip
Joined
Apr 19, 2021
Threads
39
Messages
191
Reaction score
199
Location
Utah
Vehicle(s)
Ram2500
Occupation
Heavy equipment operator
Is there any reason that your spare needs to be the same size as your running tires, in other words why couldn't you just use a 37" spare if you were running 40" tires
Sponsored

 

DailyMoparGuy

Well-Known Member
First Name
Gone
Joined
Mar 6, 2021
Threads
7
Messages
1,547
Reaction score
3,094
Location
Gone
Vehicle(s)
None
Occupation
Ghost Rider
You need to have the same diameter tire or else you’ll bind up the axle/differential.
 

kooltoys

Well-Known Member
First Name
Tony
Joined
Dec 19, 2020
Threads
18
Messages
432
Reaction score
288
Location
Central Florida
Vehicle(s)
21 JTD, 90 300zx TT, 07 Nightrain, MB 3.0L Diesel
Occupation
AV Design/Programming
im not a machanic, so I'm sure it way more technical.. Jeeps a straight axle vehicle, its not good for 1 side of the axles to turn at a different rate then the opposite side of the axle
 
OP
OP
Phil3333

Phil3333

Well-Known Member
First Name
Phillip
Joined
Apr 19, 2021
Threads
39
Messages
191
Reaction score
199
Location
Utah
Vehicle(s)
Ram2500
Occupation
Heavy equipment operator
Why, donut spares don't bind up the diff
 

DailyMoparGuy

Well-Known Member
First Name
Gone
Joined
Mar 6, 2021
Threads
7
Messages
1,547
Reaction score
3,094
Location
Gone
Vehicle(s)
None
Occupation
Ghost Rider
Why, donut spares don't bind up the diff
Donut tires are typically the same diameter. Different widths for sure though. Also if it was an emergency and all you have is a smaller tire, be sure to put it on the non-driving axle.
 

Sponsored

OP
OP
Phil3333

Phil3333

Well-Known Member
First Name
Phillip
Joined
Apr 19, 2021
Threads
39
Messages
191
Reaction score
199
Location
Utah
Vehicle(s)
Ram2500
Occupation
Heavy equipment operator
Oh I always felt like they were smaller,oh well I figured it was a dumb idea
 

texanjeeper

Well-Known Member
Joined
Apr 22, 2021
Threads
37
Messages
718
Reaction score
1,253
Location
Texas
Vehicle(s)
2020 Gladiator Sport-S Granite Crystal Metallic
Occupation
I.T.
I've never seen a donut tire that was the same diameter as the regular tire. They're all much smaller than your regular tire, at least the ones I've seen are.
 

DailyMoparGuy

Well-Known Member
First Name
Gone
Joined
Mar 6, 2021
Threads
7
Messages
1,547
Reaction score
3,094
Location
Gone
Vehicle(s)
None
Occupation
Ghost Rider
I've never seen a donut tire that was the same diameter as the regular tire. They're all much smaller than your regular tire, at least the ones I've seen are.
I should’ve said it that way too “at least the ones I’ve seen...”

I guess some manufacturers could go smaller donut spare and instruct the owner to only use on non-drive axle.
 

CerOf

Well-Known Member
Joined
Jan 1, 2021
Threads
18
Messages
1,375
Reaction score
1,624
Location
Dallas
Vehicle(s)
‘21 JTRD
If you’re close In size(height) wise, you’re fine. This isn’t an all wheel drive vehicle. The axles aren’t locked side to side.

If I lose one of my 35s, I’ll roll with the stock 33. Fully inflated 33, and can air down the other side of the axle’s tire to high 20s to get prettyclose to same diameter, and head to the tire store fir permanent fix.
 

Sponsored

Kevin_D

Well-Known Member
First Name
Kevin
Joined
Oct 18, 2020
Threads
54
Messages
2,382
Reaction score
3,200
Location
Inland Northwest
Vehicle(s)
2021 Sport S, 1971 J4000, a bunch of other stuff
If used as an emergency spare, it won’t hurt anything. Most, “Space-saver spares,” are smaller.
Although as pointed out, don’t try it on an AWD vehicle.

Kevin
 

BlamBlamTheMonkey

Well-Known Member
Joined
Feb 13, 2021
Threads
2
Messages
45
Reaction score
70
Location
n/a
Vehicle(s)
n/a
Vehicle Showcase
1
I've never seen a donut tire that was the same diameter as the regular tire. They're all much smaller than your regular tire, at least the ones I've seen are.
IIRC, when there is a donut that is a smaller diameter it should only be on 2WD vehicles, and the owner's manual will point out that if you get a flat on the drive axle, you move a regular sized wheel from the non-drive and put the donut on the now-empty spot
 

Planerdude

Well-Known Member
First Name
Mike
Joined
Nov 5, 2020
Threads
32
Messages
251
Reaction score
213
Location
Las Vegas NV
Vehicle(s)
2021 Gladiator Mojave
Is there any reason that your spare needs to be the same size as your running tires, in other words why couldn't you just use a 37" spare if you were running 40" tires
Pretty sure as long as your axle is not locked, it should be ok, the diff is designed for both tires to turn at different rates, as in cornering, the outside wheel is traveling at a greater rate than the inside wheel?but im no engineer?
 
OP
OP
Phil3333

Phil3333

Well-Known Member
First Name
Phillip
Joined
Apr 19, 2021
Threads
39
Messages
191
Reaction score
199
Location
Utah
Vehicle(s)
Ram2500
Occupation
Heavy equipment operator
That was exactly my logic
 

ShadowsPapa

Well-Known Member
First Name
Bill
Joined
Oct 12, 2019
Threads
247
Messages
40,445
Reaction score
53,879
Location
Runnells, Iowa
Vehicle(s)
'25 JTMX, '23 JLU 4xe, '82 SX4, '73 Javelin
Occupation
Retired auto mechanic, frmr gov't ntwrk security admin
Vehicle Showcase
3
I've never seen a donut tire that was the same diameter as the regular tire. They're all much smaller than your regular tire, at least the ones I've seen are.
They call them compact spares for a reason. I've got a couple of them here - much smaller than the tires on the car.

The only time there's any problem is with locked axles or limited slip axles. In that case, put the spare where there's no limited slip function (depends on the type of limited slip setup of course)

Planerdude may not be an engineer - but he's sure got the gist of it.
Sponsored

 
 







Top