Fab Fours Ghost Stubby bumper and Trail Cam view?

[LoneWolfUSMC]

I am seriously considering adding the Fab Fours Ghost Stubby bumper to my Gladiator. I have the factory front Trail Cam installed. I would like to buy the “pre-runner bar” version of the bumper, but I am wondering how much the bumper will obscure the view from the Trail Cam.

Does anyone have this bumper with the Trail Cam? Could you post a photo from the screen showing how much view is blocked with the pre-runner bar?

Thanks!

Sponsored

 

[Jeebz]

The picture below is the best I can offer as I don't currently have any lights mounted on the "Pre-runner" bar.

 

[LoneWolfUSMC]

The picture below is the best I can offer as I don't currently have any lights mounted on the "Pre-runner" bar.

That is perfect. Exacty what I needed to see. Now I just have to decide if I want to lose my fog lights.

 

[Jeebz]

I was debating the bumper for the same reason, but pulled the trigger after the other bumper I was looking at required me to cut the frame. Let me know if you have any questions or need additional pictures.

 

[Bandit’s Lair]

I just have my front camera mounted to the bumper itself. That way there’s really nothing that will impede the view. Not sure if the stock Jeep one can be mounted the same but it works for me. Allows me to see what’s on the ground when my nose is in the air. I don’t have the fancy tire lines but I get the gist if I’m about to fly into the open unknown or have another day of driving on solid ground.

 

[LoneWolfUSMC]

I just have my front camera mounted to the bumper itself. That way there’s really nothing that will impede the view. Not sure if the stock Jeep one can be mounted the same but it works for me. Allows me to see what’s on the ground when my nose is in the air. I don’t have the fancy tire lines but I get the gist if I’m about to fly into the open unknown or have another day of driving on solid ground.

AEV has a relocation kit that moves the factory camera to the bull bar on their bumper. It can probably be adapted to another, but I prefer the angle that the factory location gives. I mainly use it to make sure I am not rubbing another car when parking.

It looks like with the Fab Fours bumper you can see between the bumper and light bar. That would accomplish what I need. However, I just don’t dig losing my fogs and may go a different direction.

Sponsored