jurfie
Well-Known Member
- Joined
- Sep 4, 2019
- Threads
- 7
- Messages
- 1,433
- Reaction score
- 1,997
- Location
- Vancouver, BC
- Vehicle(s)
- 2014 Granite Crystal Metallic JKR; 2016 Daytona Grey Audi A5 Competition Package
- Thread starter
- #1
@smlobx posted a video in @TJ Mitchell Films thread about a custom bed rack that inspired me to post this idea that I've been thinking about for a while. In that video, there is a company in South Africa that rents overlanding rigs with a slide-in topper/rack:
My idea is similar, but only a few inches above the bedrail in height (just high enough to clear a fridge) and a half rack to keep the tent low. Side access storage like the RamBox at the wheel wells. Similar to this, but modified to suit overlanders with a rack for a tent:
Inside would be a drawer kitchen and a fridge like they've shown or on a slide; maybe a retractable cover between the wells or a cargoslide to access Pelican or Wolf Pack style boxes of gear above the drawer; a swing out door like the South African rig at the top with a drop down table...
Or maybe forgo the separate fridge and go with a Trax Trail Kitchen like this, but inside the slide-in:
Slide it into the bed when overlanding, but store it in the garage the rest of the time to allow full use of the bed. Make it out of aluminum to keep weight down (but no checkerplate
) with a nice anodized or powercoat finish for durability. Watertight, dustproof and secure.
The purpose of this thread is to collect ideas and post 3D model images as I work through the design. It would be a pet project for me and just for fun at this point, so it likely will be slow going, but I like the idea of crowd-source thinking. I've been planning to model something up in Blender or SketchUp and post for ideas/feedback, and then see what it would cost to get one custom made or maybe see if there is interest from a fabricator to bring it to market (but that's not the end goal).
So, what say you, fellow JT fans? Worth exploring, or dumb idea?
My idea is similar, but only a few inches above the bedrail in height (just high enough to clear a fridge) and a half rack to keep the tent low. Side access storage like the RamBox at the wheel wells. Similar to this, but modified to suit overlanders with a rack for a tent:
Inside would be a drawer kitchen and a fridge like they've shown or on a slide; maybe a retractable cover between the wells or a cargoslide to access Pelican or Wolf Pack style boxes of gear above the drawer; a swing out door like the South African rig at the top with a drop down table...
Or maybe forgo the separate fridge and go with a Trax Trail Kitchen like this, but inside the slide-in:
Slide it into the bed when overlanding, but store it in the garage the rest of the time to allow full use of the bed. Make it out of aluminum to keep weight down (but no checkerplate
) with a nice anodized or powercoat finish for durability. Watertight, dustproof and secure.The purpose of this thread is to collect ideas and post 3D model images as I work through the design. It would be a pet project for me and just for fun at this point, so it likely will be slow going, but I like the idea of crowd-source thinking. I've been planning to model something up in Blender or SketchUp and post for ideas/feedback, and then see what it would cost to get one custom made or maybe see if there is interest from a fabricator to bring it to market (but that's not the end goal).
So, what say you, fellow JT fans? Worth exploring, or dumb idea?
Sponsored
