Front Axle Compatibility - please confirm

[Beazt_253]

Hello, I am buying a front axle today and was wondering if anyone can verify that the axle part numbers with my axle and the axle im buying will work for me..

I've attached picture of my axle part number and the one I am buying

Sponsored

 

[jac04]

I'm not exactly sure of your question, but they are different gear ratios, so they are not interchangeable. Just drop the "P" from the front and search on the part numbers for more info.

 

[Beazt_253]

I'm not exactly sure of your question, but they are different gear ratios, so they are not interchangeable. Just drop the "P" from the front and search on the part numbers for more info.

How can you tell? I looked up the number and nothing really came up... The part number Is the same on both axles tho...

 

[jac04]

How can you tell? I looked up the number and nothing really came up... The part number Is the same on both axles tho...

The part numbers aren't the same. Look at the Dana numbers as well as the mopar numbers.
68376920
68376929

https://www.factorychryslerparts.com/products/AXLE-FRONT-COMPLETE/14906309/68376920AF.html

https://www.factorychryslerparts.com/products/AXLE-ASSEMBLY-Front-Complete/14822586/68376929AE.html

 

[Beazt_253]

The part numbers aren't the same. Look at the Dana numbers as well as the mopar numbers.
68376920
68376929

https://www.factorychryslerparts.com/products/AXLE-FRONT-COMPLETE/14906309/68376920AF.html

https://www.factorychryslerparts.com/products/AXLE-ASSEMBLY-Front-Complete/14822586/68376929AE.html

ohh shoot i didn't know the part number keeps going... lol

When looking at both of those links it says they both fit all the gladiator models.. only difference in the one is (DJF)?

 

[kevman65]

920AF is a standard width front axle with 3:73 gears

929AD has been superseded by 929AE and is a WIDE front axle with 4:10 gears.

The way to tell is to take the ENTIRE part number, which is 68376920AF or 68376929AD (AE) and search a MOPAR parts site. They give you a full description of each of the axles. @jac04 already did the leg work for you.

Yes, it will bolt up, no it isn't for your JT.

 

[Beazt_253]

920AF is a standard width front axle with 3:73 gears

929AD has been superseded by 929AE and is a WIDE front axle with 4:10 gears.

The way to tell is to take the ENTIRE part number, which is 68376920AF or 68376929AD (AE) and search a MOPAR parts site. They give you a full description of each of the axles. @jac04 already did the leg work for you.

Yes, it will bolt up, no it isn't for your JT.

The seller has both front and rear axles. if I purchased both and installed them instead of the 3.73 would I need a different drive shaft ? and would there be any other modifications I would need to do?

 

[Wkyfiregladdy]

The seller has both front and rear axles. if I purchased both and installed them instead of the 3.73 would I need a different drive shaft ? and would there be any other modifications I would need to do?

The only thing you should have to do is change your gear ratio with a tazer…or other device, also if these are rubicon axles then you would need wiring for lockers to work, driveshafts should be same

 

[mdyucca]

Hello, I am buying a front axle today and was wondering if anyone can verify that the axle part numbers with my axle and the axle im buying will work for me..

I've attached picture of my axle part number and the one I am buying

Did you get your axles installed? Was it straight forward with the new axle’s replacing the originals? Everything lining up and connecting?

Sponsored