Help running speaker wire!?!?

[blau iii]

I have JL C1 6x9's in my soundbar and am adding a kicker key200/4 amp to power those and the JL c2's I have in the knee pods. What is the best way to run new wire to the soundbar? I have my amp rack under the driver's side rear seat and would prefer to keep the signal wires on the drivers side since I have the power wires on the pass side. Once I get the wire to the channel at the bottom of the door, I'm good but was curious how to best get the wire into the soundbar.

Sponsored

 

[J.Noack]

I have JL C1 6x9's in my soundbar and am adding a kicker key200/4 amp to power those and the JL c2's I have in the knee pods. What is the best way to run new wire to the soundbar? I have my amp rack under the driver's side rear seat and would prefer to keep the signal wires on the drivers side since I have the power wires on the pass side. Once I get the wire to the channel at the bottom of the door, I'm good but was curious how to best get the wire into the soundbar.

I ran my speaker wire up the passenger side B-Pillar as that's where the stock signal wires were located headed to the sound bar.

 

[blau iii]

I ran my speaker wire up the passenger side B-Pillar as that's where the stock signal wires were located headed to the sound bar.

Great, thanks. That's what I was afraid of.

 

[Cbhuss75]

Reviving an old thread. I have a 2020 Jt with the non-premium system. Other posts mentions the green/yellow and green/ grey as the signal wires however I don’t seem to be getting any signal from them and when I cut them to splice into the sound bar kept on playing. The only other twisted pair in the B pillar is lavender colored. What wires did you tap for the signal wire to LOC or high level inputs? Thanks.

Sponsored