Installing Baja designs fogs?

[Jefe1018]

Just ordered a BD Squadron Pro fog light kit. Curious for those of you with aftermarket fogs, do you use an auxilariy switch or did you change the pcm settings to use the factory switch via tazer or JSCAN?

Sponsored

 

[Fpolanco]

I ended up using the OEM fog light switch.

One thing I did notice is that the Squadrons would turn off after a few minutes. Spoke to customer service at Baja and they sent me a new wiring harness.

I think the Pros are too much of a draw. New harness connects directly to the battery w/ a relay so you could still use the OEM switch.

Not sure if the Tazer or JSCAN fix that.

 

[Jefe1018]

I ended up using the OEM fog light switch.

One thing I did notice is that the Squadrons would turn off after a few minutes. Spoke to customer service at Baja and they sent me a new wiring harness.

I think the Pros are too much of a draw. New harness connects directly to the battery w/ a relay so you could still use the OEM switch.

Not sure if the Tazer or JSCAN fix that.

Thanks for the reply on this.

I ended up wiring up to the factory harness and adjusted the settings via JSCAN to LED fog lights. No issues, but I haven't really ran them for an extended period of time.

Sponsored