Installled OEM LED headlights, no halos, j-scan question

[rj74]

Picked up a set for a smoking deal. Changed the settings and the brights work, which did not until I went into the j-scan. the only thing is neither of the halos lights up. Its a 21 Rubicon and has 4 wires on both harnesses. any suggestions on what might need to be changed in the j-scan?

Sponsored

 

[mdyucca]

In the Tazer you go into Lighting menu and when you get to Halos its either yes or no. Yes meaning you have activated the Halo circuit. Not sure how the J-scan works. With four wires at the headlight connection it should just be a matter of activating the Halo circuit.

 

[jjdustr340]

Perhaps play with the Jscan settings under the DRL location? Just a guess going off memory.

 

[rj74]

Tried the signature lights as suggested in a different post/forum but they still don't light up. Not a huge deal as I'm not a fan but atleast wanted the option.

 

[Klicht87]

Did you wire the halos to the harness under the passenger side dash as the instructions call out? or even easier, wire it to the fuse box.

 

[rj74]

Did you wire the halos to the harness under the passenger side dash as the instructions call out? or even easier, wire it to the fuse box.

It is a late model 21 it is already wired for it. i think i found the setting just haven't had a chance to get the j-scan out and change it.

 

[Stormtroopin]

Looking at a couple of these threads to try and get my halos working, I have a 2021 and both headlights have 4 wires. What setting in Jscan do I need to activate to get the halos working? I already switched the halogen setting to LED and those have been working. Any help would be much appreciated.

 

[ReidHof6]

Looking at a couple of these threads to try and get my halos working, I have a 2021 and both headlights have 4 wires. What setting in Jscan do I need to activate to get the halos working? I already switched the halogen setting to LED and those have been working. Any help would be much appreciated.

You need to activate your Signature Lamp setting and set them to Halo. Search 'Signature' in adaptions and it will be the 2 settings that show up. I just did this the other day.

https://www.jeepgladiatorforum.com/forum/threads/complete-oem-halogen-to-oem-led-conversion.70017/

 

[Stormtroopin]

Thank you for the help, finally got them to work.

Sponsored