Instant MPG disappeared from Fuel Economy screen on instrument cluster display.

[S JEEPN]

My 2024 did not have the current MPG number down to the right on the economy display until i took it to the dealer for service and it came back with it working. I had put it in the top left of the changeable items soon after i got it often saw others with it on the economy page thought it was just a model or model year difference.

Sponsored

 

[JKenTex]

Go to the main screen that normally has it on there, if it is showing distance to empty under the MPG gauge, scroll over so that is gone and nothing is showing up under the gauge. Now shut it off and wait till everything is off, lights and dash, restart and it should be there. Let me know if it works for you. It has happened to me twice and both times this fixed it

Apparently this isn't uncommon!

This should be pinned.

CyberHero you're a hero! LOL

 

[AustinKalb]

There is an fix in this thread. It was simple and worked for me the first time. Never happened again.

As I recall… Set the display to show the one MPG screen without Range. Shut down, open and close doors, wait 10 minute, and restart: viola it’s back. (It could be the screen with Range, I’m a little fuzzy).

 

[WambliSka]

It disappeared and reappeared on my ‘22 a bunch of times over the years all on its own. I just assumed OTAs. So far the ‘26 has had no issues.

 

[Coltron_Actual]

Mine hasn't disappeared since winter finally ended and I'm not remote starting near as often. I'm not saying that's the cause, but it seems a coincidence. But I also had my gauge cluster replaced because the glass was delaminating. Perhaps I'm on to nothing at all.

 

[Mud Pie]

Today I noticed my display was missing the Current. I clicked left, I clicked right, no change. Didn't bother me, it more concerned me. Why did it go ? Computers run programs; that's all they CAN do. My Jeep is not "connected", so no OTA to alter the program. Sure, "glitches" happen, but not as often as one is led to believe, that's a universal catch-all told to someone. (in my previous life, I was a programmer) If a program ran fine for months or years, the program seemed well, but when it screwed up, the standard instruction was "reboot". I've told MANY a customer that over the decades and it really does work. Basically shuts down the code and starts fresh.

Before I disconnected both batteries, I decided to check here.

Found the solution !! Not the cause, really, but the solution. I'll take that any day.

Thanks guys !!

 

[Rusty PW]

Today I noticed my display was missing the Current. I clicked left, I clicked right, no change. Didn't bother me, it more concerned me. Why did it go ? Computers run programs; that's all they CAN do. My Jeep is not "connected", so no OTA to alter the program. Sure, "glitches" happen, but not as often as one is led to believe, that's a universal catch-all told to someone. (in my previous life, I was a programmer) If a program ran fine for months or years, the program seemed well, but when it screwed up, the standard instruction was "reboot". I've told MANY a customer that over the decades and it really does work. Basically shuts down the code and starts fresh.

Before I disconnected both batteries, I decided to check here.

Found the solution !! Not the cause, really, but the solution. I'll take that any day.

Thanks guys !!

Mine disappeared the other day. I did the solution and it came back.

Sponsored