KUAFU 3 Piece Steel Bumper Unboxing and Install $460 From Amazon

[HouseofBoyd]

If anybody is interested, I bit the bullet and purchased the KUAFU 3 piece steel bumper off of Amazon. I had some reservations about purchasing it, but figured if I didn't like it, I'd just sell it..Overall, I was pretty impressed with it. Worth the money, easy to install, etc. I did prep and respray it just as a precaution. I also installed the OEM Rubicon skid plate with it as well..I put together a howto video that may answer any questions you may have concerning this particular bumper.



for all pics, click the link below:

http://houseofboyd.com/installing-3-piece-aftermarket-bumper-on-our-jeep-gladiator/

Sponsored

 

[Terry]

If anybody is interested, I bit the bullet and purchased the KUAFU 3 piece steel bumper off of Amazon. I had some reservations about purchasing it, but figured if I didn't like it, I'd just sell it..Overall, I was pretty impressed with it. Worth the money, easy to install, etc. I did prep and respray it just as a precaution. I also installed the OEM Rubicon skid plate with it as well..I put together a howto video that may answer any questions you may have concerning this particular bumper.



for all pics, click the link below:

http://houseofboyd.com/installing-3-piece-aftermarket-bumper-on-our-jeep-gladiator/

Cannot believe how much it looks like my MoPar Steel Stubby Bumper. The KUAFU is made of 3/16 inch cold rolled Steel as is the MoPar. I was wondering about a cost comparison so I compared and found the KUAFU was significantly less. As long as fitment is good, there is no reason to go MoPar. My wife's mother, the strongest woman I have ever known was born and raised in Ashland, KY. Beautiful place..... Be safe and keep on Jeepin'

 

[Fluffhead]

If anybody is interested, I bit the bullet and purchased the KUAFU 3 piece steel bumper off of Amazon. I had some reservations about purchasing it, but figured if I didn't like it, I'd just sell it..Overall, I was pretty impressed with it. Worth the money, easy to install, etc. I did prep and respray it just as a precaution. I also installed the OEM Rubicon skid plate with it as well..I put together a howto video that may answer any questions you may have concerning this particular bumper.



for all pics, click the link below:

http://houseofboyd.com/installing-3-piece-aftermarket-bumper-on-our-jeep-gladiator/

I done the same thing last weekend. I’m pretty happy with the outcome. Where did you get your skid plate from? Thanks

 

[brianinca]

https://www.ebay.com/itm/192905080091

Where I got mine.

I done the same thing last weekend. I’m pretty happy with the outcome. Where did you get your skid plate from? Thanks

 

[ShadowsPapa]

Other than packaging - differences there, that looks almost exactly like the one I bought on eBay last year. Same holes, same fog lights. Hardware is different as your hardware for the fog lights worked better.

 

[HouseofBoyd]

I done the same thing last weekend. I’m pretty happy with the outcome. Where did you get your skid plate from? Thanks

Quadratec.com

https://www.quadratec.com/p/mopar/f...33-G9Lf0RMF7GlO5HnaEO_YjqtkI5DE0aAksmEALw_wcB

 

[HouseofBoyd]

For those of you who want to get the OEM skid plate...you can get the skid plate on ebay and other sites fairly cheap..but before you purchase, you need to verify that you have the proper brackets for the skid plate...I ordered mine as a kit from Quadratec...

https://www.quadratec.com/p/mopar/f...33-G9Lf0RMF7GlO5HnaEO_YjqtkI5DE0aAksmEALw_wcB

 

[ShadowsPapa]

And you can get the rear brackets and bolts, etc. for the steel skid plates at JustForJeeps


Mopar Front Skid Plate Brackets and Hardware for 2018-2021 Wrangler JL and 2020 Gladiator JT
FSPBH
$50.32

Sponsored