L track bed rails under $100

[BigRed97]

Found a 'kit' on Amazon and eBay from Pit Posse. It came with 2 rails (4ft) and 4 eyelets
I might add a front rail later but for now I didn't.
With buying some bolts it was about $80 total

Sponsored

 

[robburns76]

Nice! I was thinking of doing the same thing. Do you wish you would have done longer pieces and didn't have the gaps at the end? and do you have a link to the kit?

 

[BigRed97]

Functionally, no. Any longer wouldn't really have made a difference.
But if they were even an in longer the factory holes would have landed behind the circular portions of the track. As they sit(using the predrilled rear most hole to the rear most bed hole) the holes landed in between the circles. Not a big deal, just a little tight getting the counter sink bit in there.

Here is a link to the silver ones, if you look around you'll find the black ones

https://www.amazon.com/dp/B008TU2T5M/ref=cm_sw_r_other_apa_i_aKaVEb0KCFWGN

 

[robburns76]

Functionally, no. Any longer wouldn't really have made a difference.
But if they were even an in longer the factory holes would have landed behind the circular portions of the track. As they sit(using the predrilled rear most hole to the rear most bed hole) the holes landed in between the circles. Not a big deal, just a little tight getting the counter sink bit in there.

Here is a link to the silver ones, if you look around you'll find the black ones

https://www.amazon.com/dp/B008TU2T5M/ref=cm_sw_r_other_apa_i_aKaVEb0KCFWGN

Thanks. i've found the black ones on there before but they were $109 for the kit, so was wondering where the $80 ones were .

Thanks on the size advise. I was debating to go with the 4' or buy some 6' ones and cut them down. I realize no matter which ones I get I'll have to drill the mounting holes.

 

[BigRed97]

The black ones are there for $80, just have to word the search right. I couldn't find them quickly this time. I bought mine on eBay and it looks like it was the last one from the seller

Sponsored